Apollo Outreach: The Workflow, Its Limits and What to Add

    Short answer

    How to run list, verify, sequence and send inside Apollo, where it stops, and what to bolt on before the first email goes out

    Artem Smirnov
    Artem Smirnov

    Last updated · 8 min read

    Artem Smirnov in a dark suit against a charcoal studio backdrop, next to the line 'APOLLO IS ONE PIECE. The result comes from what you add'

    Apollo outreach means finding prospects and contacting them from one Apollo account. Apollo puts a contact database, email sequences, LinkedIn steps that land in your task list and a dialer in one place. It can carry a small outbound motion end to end. It stops short in three places: LinkedIn stays manual, credits expire each cycle, and the vendor grades its own data.

    My team runs email and LinkedIn campaigns for B2B companies, with phone only as an add-on for warm lists of people who have already answered or opted in. So every result number below is an email or LinkedIn number, and every phone figure is Apollo's.

    I treat Apollo as one list source and one sequencer inside a bigger system, because a list from a single database carries that database's blind spots. I pull contacts from Sales Navigator, Apollo, UpLead, ZoomInfo and RocketReach, never from a scraped dump.

    How do you run outbound in Apollo, step by step?

    StageWhat Apollo doesDocumented limitWhat to add
    1. ListSearchable contact and account databaseSize figures are self-reported; privacy compliance sits with youTwo more list sources, with your past clients as the seed
    2. VerifyEmail verification, flags for catch-all domains (servers that accept any address) and automatic sequence pause when bounces spike (Apollo deliverability)The vendor is checking its own dataAn independent verifier before every send
    3. SequenceEmail sequences, with LinkedIn and call steps in the same sequenceOnly email steps send on their ownA LinkedIn first touch and enough touches
    4. SendSends from connected mailboxes; sets up DNS records on domains bought through ApolloLow daily caps per mailbox (next section)Separate sending domains and enough mailboxes
    5. LinkedIn tasksQueues four LinkedIn actions with drafted textYou do every action by handSomeone with a strong profile who works the queue daily
    6. CallsDialer on paid plans; every call spends creditsPower, parallel and international dialing need a paid add-onWarm calls to repliers only, if you call at all
    7. HandoffExports up to 10,000 leads in one click (Apollo pricing)No rule on who answers each replyA CRM and one named inbox owner

    For stage 1, build the list in this order:

    1. Start from your past and current clients, then search for lookalike companies.
    2. Search by the titles buyers in that niche actually hold. For an IT services firm that means CTO, Head of IT or Director of IT.
    3. Exclude Assistant, Manager and Associate titles on purpose.
    4. Merge your other sources and remove duplicates.

    Here is one campaign from our own work, for a US marketing agency. We optimized the LinkedIn profiles and tested two offers against each other. The lists came from Sales Navigator plus Apollo, and the outreach ran on LinkedIn and warm emails.

    That campaign drew 141 replies in three months. Booked calls grew month by month: 17, then 33, then 49, so 99 in the quarter. Apollo supplied one of the two lists behind those calls.

    Apollo claims 240M+ contacts and 98% email accuracy on its data page. That is the vendor counting its own records, and I found no independent accuracy audit to set next to it.

    Apollo says the same thing. Apollo's own 2026 guide on bounce rates states that no audited, independent study ranks sales intelligence platforms by bounce rate head-to-head. The same guide labels its 97% email accuracy figure as vendor-reported. So treat both numbers as claims, not test results.

    Accuracy also slips with time. Explorium's 2026 benchmark says B2B contact data decays at roughly 2.1% per month. So a figure claimed once does not stay true unless the records get refreshed.

    Before you trust a file, run a 500-contact sample through your own verifier and read the bounce figure yourself. Treat an Apollo export the way you would treat a cheap list from a freelancer: unproven until your own verifier says otherwise. Instantly's 2026 benchmark report calls a bounce rate under 2% ideal. My line is stricter: under 0.5%.

    What has to be true before Apollo sends a single email?

    Apollo's deliverability page says a safe start is about 20 emails per day per mailbox, with 50 as the ceiling. It sets up SPF, DKIM and DMARC for you only on domains bought through Apollo. On any other domain, the DNS work is yours. Apollo's warmup runs on the third-party Warmbox.ai, and its warmup guide asks for at least two weeks before anything goes out.

    Google sets its own ceiling on complaints: Gmail's guidance wants the spam rate reported by users below 0.1%, and it must never reach 0.3%. Postmaster Tools, Google's free dashboard for senders, shows that number.

    Check these items before the first send:

    1. Every address is verified with NeverBounce or DeBounce, and no list goes out with a bounce rate above 0.5%.
    2. SPF, DKIM and DMARC are live on each domain you send from.
    3. Your invoice domain never sends cold email. Separate sending domains do.
    4. Every new mailbox has warmed for at least 10 to 14 days, my own minimum, and for the full two weeks if you use Apollo's warmup.

    Which anti-spam laws apply before the first send?

    Check the law where your buyers sit. The FTC's CAN-SPAM guide covers all commercial email, and each separate email in violation can draw penalties of up to $53,088.

    Canada is built on consent: ISED Canada says to understand CASL's consent requirements before you send commercial email. Before a Canadian list enters an Apollo sequence, have a Canadian lawyer check the consent basis. Prospects in Germany, Austria or the Czech Republic get LinkedIn from us, and cold email only with a compliant basis. This is not legal advice.

    Can Apollo run LinkedIn and email as one sequence?

    Yes, but only the email half runs by itself. Apollo's knowledge base confirms LinkedIn tasks stay manual.

    There are four LinkedIn task types: send a connection request, view a profile, interact with a post and send a message. Apollo drafts the text. You copy it, open the profile in LinkedIn, paste it and mark the task complete. The same page warns that too many rapid LinkedIn actions can get your account temporarily restricted.

    On LinkedIn, Apollo is a to-do list. The person sending matters more than the drafted text. Buyers open your profile before they answer, so a thin profile sinks even a well-drafted message, and Apollo cannot fix that for you.

    My sequences start on LinkedIn. A warm email comes after. Budget 5 to 6 touches over the two channels, at a minimum. In our campaigns, follow-up three usually earns the reply. Leave real days between sends. The same structure carries over to Apollo email sequences, with the LinkedIn steps added as manual tasks.

    How do Apollo credits and costs add up?

    The FAQ on Apollo's pricing page describes Basic, for individual sellers, with email sequencing and core integrations; Professional, with higher credit limits, AI features and call recording; and a Custom plan through Apollo's sales team. When I checked at the time of writing, the page text showed no per-seat dollar figure, so these rules decide your real bill.

    RuleWhat Apollo's docs sayWhat it means for you
    Credit poolPooled across the team and granted upfront each billing cycleOne heavy user can drain the whole team's month
    RolloverUnused credits do not roll over, add-on credits includedBuy only what you will use this month
    Add-on creditsCharged immediately and recurring until you set them back to zeroReset the slider after a busy month
    Plan levelEvery seat in the account shares one planYou cannot put one rep on a higher tier
    DowngradesTake effect immediately, with no refundDowngrade close to the end of a cycle
    Sending accountsFree plans connect Gmail only; paid plans add Microsoft Office or any other providerOutlook teams need a paid plan to send
    Warmup mailboxesPaid plans typically warm 1 mailbox per seat; each extra linked mailbox uses 200 credits per 30-day billing period (warmup guide)A big mailbox fleet eats data credits

    Should you use Apollo's dialer for outbound?

    The Advanced Dialer add-on brings power and parallel dialing, plus international calling. Apollo's product page lists the add-on at $149 a month, or $119 billed annually, plus usage credits.

    My team does not use it, because we do not cold call. If your team already runs phone outreach at volume, test the add-on for one billing month and judge it by your own connect rate.

    Who should run outbound on Apollo alone, and who should add more?

    TeamApollo alone?What to add
    Solo founder testing one marketYes, for a first list and a small sequence from 1 or 2 warmed mailboxesAn independent verifier and one separate domain
    Small sales teamAs a sequencer, with care: one credit pool and one plan for every seatA second list source, separate domains, a CRM, territories split per rep
    Team sending at volume across marketsNoSeveral list sources, many domains and mailboxes, daily monitoring

    Several Apollo alternatives fill the gaps. An agency starts to make sense when nobody owns deliverability. When we run cold email for a client, my team handles domains, SPF, DKIM, DMARC, warmup and monitoring on dedicated IPs, and one client can run on 10 to 20 sending IPs.

    For planning, I use what our own sends show. Expect about 1% of contacts to reply, closer to 0.5% once you send thousands a day. Then 10% to 50% of repliers book a meeting. Bigger volume pulls these averages down, and none of them is a promise.

    For an outside reference, Instantly's 2026 benchmark report puts the average reply rate at 3.43%, with top performers above 10%. That is an average across many senders on one platform, so I still plan on the lower numbers.

    Neither a bad list nor a weak sender can be rescued by copy. Test every sequence at 20 emails a day per mailbox first. Weak results there will not improve with volume. Scale only after it works. If you are deciding this week, open Apollo, check how many mailboxes your plan warms before extra credits kick in, and count your list sources. If the answer is one, add a second source before you add a single mailbox.

    If you are deciding whether Apollo alone is enough for your list, tell me your setup on a quick call and I will say what I would add first.

    Questions people ask about Apollo outreach

    Was Apollo shut down?

    I found nothing showing the sales platform has closed: its pricing, data, deliverability and dialer pages were all live when I checked at the time of writing. If a headline says "Apollo shut down", check which company and product it names before you change plans.

    Can you export Apollo leads and send from another tool?

    Yes. You can search in Apollo, export the list and send from a dedicated sending tool. Run every export through your own verifier first, because a file you download has been through none of your own checks. My Instantly vs Apollo comparison covers when that split is worth the second subscription.

    Is Apollo the same as Outreach?

    No. Outreach is a separate sales engagement platform, not another name for Apollo. Its pricing page shows no dollar price at the time of writing: you pay per seat plus AI credits and request a quote. I break down what that usually means in Outreach.io pricing.

    What must every cold email contain under CAN-SPAM?

    Besides a working opt-out, four things, per the FTC's CAN-SPAM guide: truthful sender and routing details, an honest subject line, a clear note that the message is an ad, and a valid physical postal address. The opt-out link has to keep working for at least 30 days after each send.

    If an agency sends for me, who carries the legal risk?

    Both of you. The FTC guide says you cannot contract away legal responsibility. The company whose product is promoted and the company that actually sends can both be held liable. Before any agency emails in your name, ask how it handles opt-outs and exclusion lists.

    Want to see what we would build for your company?

    I am Artem Smirnov. I help established B2B companies build and run the go-to-market system behind their pipeline, from outbound to AI search visibility. Book a call and we will see what fits yours.

    Artem Smirnov
    Artem Smirnov

    I help established B2B companies build and run their go-to-market systems. 9 years in outbound, 10,000+ campaigns.