Selling Into Retail and Reaching the Right Category Buyer

    Short answer

    How a B2B supplier picks the route, finds the one person who decides on its category, and opens the conversation with email and LinkedIn

    Artem Smirnov
    Artem Smirnov

    Last updated · 8 min read

    Artem Smirnov in a dark suit against a charcoal studio backdrop, next to the line 'SELLING INTO RETAIL. A portal is a queue, not a meeting'

    A retail buyer asks one question about your product: will it earn its shelf space in my category? Selling into retail means getting that one buyer at one retailer to add your product to the category they run. You sell to the retailer, and the retailer sells to the shopper.

    Three choices come before any message: the route in (supplier portal, direct outreach to the buyer, or both), the one category you enter first, and the decision maker who owns that category at each retailer.

    I have no retail chain case to show you, so I will not invent one. The route facts come from Walmart's supplier pages. The targeting and follow-up rules come from the B2B outbound campaigns I plan. No two suppliers sell the same way, so adapt them to yours.

    Is retail worth the margin and control you give up?

    Retail pays when the retailer's reach is worth more than what you hand over. Orders are larger and the shelf does part of the selling. You pay in four places.

    The retailer's share comes out of your margin. The retailer decides how the product sits and looks. Orders and reorders need an owner on your team. And one big account can grow into most of your revenue, so losing it hurts the whole company.

    Run this go or no-go check before any outreach:

    1. Can you fund larger orders?
    2. Can you give up margin and still make a profit?
    3. Can you accept less control over how your product sits on the shelf?
    4. Do you have someone with time to manage the account after the first order?

    If two or more answers are no, fix the business before you contact a single buyer. Outreach cannot rescue a product that loses money on every order.

    Should you go through a retailer's supplier portal or contact buyers directly?

    Walmart's supplier page puts most of the routes in the table below on one page, plus a separate path for services and non-resale goods (Walmart suppliers). U.S. businesses start by creating an account, and Walmart says plainly that self-registering does not guarantee an agreement (Walmart supplier application).

    Walmart also holds Open Call once a year (Walmart Open Call). At that event, selected founders with U.S.-made, shelf-ready products meet directly with Walmart and Sam's Club merchants. Walmart calls the people who hear supplier pitches merchants, so search for "merchant" plus your category when you look for the decision-maker.

    RouteWhat it isWhen it fitsWhat you give upWalmart example
    Supplier portalRetailer buys your product and resells itYou can handle big-chain volume and paperworkCertainty: Walmart says registering guarantees no agreementSupply to stores, Sam's Club and Walmart.com
    Direct buyer outreachEmail and LinkedIn to the category ownerAny retailer with a buyer you can nameYour time, plus goodwill if the message missesNot on Walmart's supplier pages; check vendor rules
    MarketplaceYou sell to shoppers on the retailer's siteYou want retailer traffic before a buyer commitsNo retailer purchase; you carry the sellingWalmart Marketplace
    Private labelYou make products sold under the retailer's brandYou have spare capacity and accept their specYour own name on the shelfWalmart Brands; ask about it when registering
    Pitch eventSelected suppliers meet merchants at a set eventShelf-ready product that meets the event's rulesTiming: you work to the retailer's yearly calendarOpen Call, for U.S.-made goods

    What does each route cost? Neither Walmart page publishes a fee, margin or payment term, so I give no number rather than guess. Ask for terms in your first buyer meeting. The cost you can price upfront is your own outreach, and typical lead generation agency pricing gives you a reference point.

    My rule for which route goes first:

    • National chain with a portal: register, then write to the category owner the same week, unless the retailer's supplier page tells vendors not to contact merchants directly. A portal is a queue, not a meeting: the application guarantees nothing, while a named contact is something you can get yourself.
    • Regional chain or independent store: direct outreach to the buyer or owner.
    • U.S.-made and shelf-ready: watch for Walmart's next Open Call, and keep writing to buyers elsewhere meanwhile.
    • Not ready for wholesale volume: sell on a marketplace first to build order history, and start outreach once the go or no-go check passes.

    European suppliers writing to U.S. chains also face footer and send-time rules when cold emailing U.S. prospects from Europe.

    Which retailers and which category should you go after first?

    I start every target list with current customers, then look for lookalike companies. List each retailer buying from you now by category, store format, size and region, and find retailers that match. Do the market arithmetic first: how to pick the market before writing an email.

    Commit each campaign to one category and one retailer type. I tell clients to stay with one offer and one audience for 12 months. Pitching the hardware aisle and the home decor aisle together splits your proof in two.

    Start close to home. I aim at a local audience whenever I can, because buyers open up faster to a supplier from their own city.

    Who exactly should you contact at a retailer?

    Contact levelExample titlesInclude or excludeWhy
    Category buyerBuyer or senior buyer for your category, such as "Garden Buyer"; at Walmart, the merchant for your categoryIncludeThe title closest to the decision about your category
    Category-level merchandisingCategory manager, merchandising manager for your categoryIncludeThe same category, and a second person at the same retailer
    Independent store ownerOwner, founderInclude if an owner approved one of your past ordersYour own past wins tell you whether owners sign
    Store staff at a chainStore manager, department leadExclude, unless your past wins show one signedStore-level titles say little about chain-wide decisions
    Generic titlesAssistant, Associate, a bare "Manager"ExcludeNothing in the title ties the person to your category

    Before I build any list, I check who actually signed each deal already won. Note the title of whoever approved your first order at each retailer, then search for that title at lookalike retailers, in the words that niche really uses. Cut anyone when you cannot say what they decide about your category, and write a separate message for each person you keep.

    What should the first message to a retail buyer say?

    Off-target messages cost more than a missed reply. Gartner asked 632 B2B buyers in late summer and early fall 2024, and 73% said they avoid suppliers who send outreach that does not match their needs (Gartner). The survey covers B2B buyers in general, so treat it as a signal for retail buyers.

    Keep each message to one buyer and one category. One generic pitch sent to everyone is a lottery ticket. In a first message I ask for a short meeting and save the product for the call. The call still costs the buyer 15 minutes of a busy week, so you have to sell it. One line of proof from current customers goes inside.

    The buyer also checks you. I have watched the same email get very different reply rates with nothing in the message changed, because the reply rate follows the sender. A so-so message from a credible sender gets answered. A perfect one from an empty profile often gets ignored. Before the first send, run the check buyers run on a sender: look at your own LinkedIn profile and website.

    A made-up example from a tool storage maker to a regional hardware chain:

    Subject: Wall storage for your garden aisle

    Hi Laura,

    We make wall-mounted tool racks in your region. Garden centers near you already stock them.

    Would 15 minutes before your next garden review make sense? I can come to you, or we can do it on Zoom.

    Jordan

    How many times should you follow up with a retail buyer, and on which channel?

    Plan six touches for each buyer:

    1. LinkedIn connection request, no pitch.
    2. Short LinkedIn message about their category.
    3. First email, now warm because they know your name.
    4. Follow-up email with new proof, such as a reorder.
    5. LinkedIn message with one short question.
    6. Final email after a real gap.

    Email is never my first touch. Leave real time between touches; my team usually sees the best response on the third follow-up. I count conversations started, and a buyer asking about lead times counts.

    Before any volume goes out, my team sets up SPF, DKIM and DMARC. Google requires bulk senders to personal Gmail accounts to have all three (DMARC can start at p=none, the monitoring-only setting) and to keep user-reported spam under 0.1%, never reaching 0.3% (Google).

    What happens after the buyer agrees to meet?

    My agency's job ends where yours starts. We book buyer meetings through cold email and LinkedIn and never do pure cold calling; warm calls to people who already replied are an optional extra. Line reviews, pricing, trade terms and the account stay with your team, because booking a meeting and closing a deal are separate jobs.

    Bring a shelf-ready product, your margin after the retailer's share, your supply answer for a larger order and the name of the account owner.

    This week, write down your last three customers and the title of the person who signed (if none is a retailer, list three retailers that already stock products like yours). That list tells you which category to enter, which title to search for and which retailer to email first.

    Preparing to approach a category buyer? Book a call and tell me your product and price point. I will say which retailer I would contact first.

    Questions suppliers ask before contacting retail buyers

    Do I need a distributor or broker to sell to retailers?

    It depends on the retailer. Some buy direct from suppliers, and others only through approved partners. A distributor or broker can help when you lack people to manage many accounts, but only if the retailer accepts that route. Ask the buyer in your first meeting how they prefer to buy, then build the partner's share into your margin before you agree to anything.

    Is it legal to cold email a retail buyer in the U.S.?

    Yes, if you follow CAN-SPAM, which covers B2B email too. Include a valid physical postal address, honor opt-outs within 10 business days and keep headers and subject lines accurate. This is not legal advice.

    Can I email retail buyers in Germany, Austria or the Czech Republic?

    Prior consent rules apply there, so without a compliant basis we do not use cold email in those three markets. We use LinkedIn instead. If your target retailers are based there, open with a connection request and a short note about their category. This is not legal advice.

    When do retail buyers usually reply?

    Some buyers reply during the sequence, and others come back months later when they next work on that category. People don't make decisions fast in every space, so I plan the pipeline around the buyer's pace. Log every "not now" in your CRM with the month the buyer named, so you write back on time.

    Want to see what we would build for your company?

    I am Artem Smirnov. I help established B2B companies build and run the go-to-market system behind their pipeline, from outbound to AI search visibility. Book a call and we will see what fits yours.

    Artem Smirnov
    Artem Smirnov

    I help established B2B companies build and run their go-to-market systems. 9 years in outbound, 10,000+ campaigns.