A distributor does not buy your product. It buys the margin on it, and it keeps the line only if its own customers ask for it. Selling to distributors means making that case on paper, before the first call. A distributor says yes when three things hold:
- It makes money on every unit and every order.
- Its own customers will ask for the product.
- You will back its reps after the contract is signed.
A small pilot limits the distributor's risk while it checks all three.
Run the margin math before you build a list. Build the list before you write a message. Agree the commercial terms before anyone drafts a contract, because EU competition law caps several of them.
I work on the outreach side, cold email and LinkedIn aimed at a first meeting. On a distributor deal, that is where our part would stop. Margin, exclusivity and the contract belong to the manufacturer's own people. The legal points further down are cited from EU sources, and this is not legal advice.
Should you sell direct or through distributors?
Distribution is a trade. You give up margin and some control to get reach, one of the choices in any manufacturing sales process.
Run your product through these six questions.
| Question | Sell direct when | Go through distributors when |
|---|---|---|
| Deal size | Each deal is large enough to pay for a salesperson's time | Orders are small, frequent and spread across many buyers |
| Number of end buyers | Every account worth having fits in one spreadsheet | There are thousands of buyers you could never list or visit |
| Local stock and service | Buyers can wait for delivery from your plant and rarely need help on site | Buyers expect stock nearby, fast delivery or local repair |
| Technical complexity | Every sale needs your engineers in the room | A trained distributor rep can explain the product without you |
| Control over price and brand | You need to set every price and own every customer relationship | You can let the distributor set its own resale price and hold the account |
| Cash-flow tolerance | You can fund a sales team and wait for many customers to pay | You would rather give up margin than fund that team |
Decision rule: check deal size and technical complexity first. If both favor selling direct, sell direct whatever the other rows say, and use distributors only for spares, consumables or the small accounts your team cannot cover. Otherwise, if four or more rows favor distributors, distributors are worth the margin you give away.
Deal size often settles it. Most companies my team works with close deals worth USD 10,000 or more, frequently six or seven figures. At that size I would want to talk to the buyer myself. Plenty of manufacturers end up running both routes: direct on large projects, distributors for repeat orders.
The price-control row also has a legal side. In the EU you cannot fix what a distributor charges, and the last section explains that rule.
How much margin does a distributor need, and how do you work it out?
Anyone who gives you one distributor margin is guessing. Many of the figures that circulate online name no source, and many come from consumer goods sold through retail.
A distributor's margin on an industrial line depends on several things: order size, how much stock it holds, how much technical help its reps give, and what competing lines in its range pay. A number from a grocery supply chain tells you nothing about cable tray or safety equipment.
So work it out from your own market, starting from the price the end user pays.
- Find the end-user price the market accepts. Use your own direct sales, competitors' list prices and what your current customers pay.
- Ask 3 to 5 target distributors what gross margin they need on a line like yours. Ask it early, because every later number depends on the answer.
- Subtract that margin from the end-user price. What remains is your transfer price, the price you sell to the distributor at.
- Check the transfer price against your cost plus the margin you need to stay healthy.
Two formulas do the work:
- Transfer price = end-user price x (1 - distributor margin)
- Floor price = unit cost / (1 - your target margin)
If the transfer price is at or above your floor price, the deal can work. If it is below, stop. The deal cannot work as priced.
One trap catches many manufacturers. Distributors talk in margin, which is measured on their selling price. Many manufacturers think in markup, which is measured on cost. A 25% margin equals a 33% markup. If you mix the two up, you misprice the whole line.
Here is a worked example. The numbers are invented to show the method and are not a benchmark.
| Step | Hypothetical figure |
|---|---|
| End-user price the market accepts | EUR 1,200 per unit |
| Gross margin the distributor asks for | 25% |
| Transfer price (1,200 x 0.75) | EUR 900 |
| Your unit cost | EUR 620 |
| Your target margin | 35% |
| Floor price (620 / 0.65) | about EUR 954 |
| Gap | EUR 54 per unit short |
At EUR 900, this line misses your own target. You have three ways out:
- Raise the end-user price to about EUR 1,272, if the market will pay it.
- Cut unit cost to about EUR 585.
- Accept the lower margin on purpose, for a stated strategic reason.
Pick one before you contact anyone.
The distributor also thinks per order. In this example it earns EUR 300 gross per unit, so a 20-unit order is worth EUR 6,000 to it. Put that per-order figure in your first email, because a buyer can picture it.
Decision rule: if the transfer price leaves you under your floor price, fix the price or the cost before you pitch a single distributor.
When a manufacturer tells me distributors keep saying no, I look at the offer before the outreach, because the real problem is often how the offer is packaged. One client called us "translation experts": we turn what a company does into what people actually want to buy. A distributor needs the same translation, from your spec sheet into its margin.
Who at the distributor should you contact first?
The Bureau of Labor Statistics describes wholesale and manufacturing reps as people who sell on behalf of wholesalers or manufacturers to other businesses and organizations. On technical products, a specialist joins their presentations, sometimes a sales engineer. Wholesale sales are moving online, but BLS expects online sales mostly to complement face-to-face selling.
Before a rep pitches your line, the distributor has to want it. A category management consultant writing in NAW's MDM in 2023 lists profitability as the first factor when a distributor picks key supplier partners. The same piece says a category strategy helps the buyer decide which suppliers to partner with most closely.
Once the line is in, the BLS point applies: the reps who carry it will still sell in person. They need material they can put on a customer's desk.
The rep rarely decides whether a line gets added, though. Contact these people first:
- Product or category manager: decides which lines go into the range and which come out.
- Branch manager: decides what the branch reps push this month, and can run a pilot.
- Owner or managing director, at small distributors: decides both of the above.
- Technical sales lead or sales engineer, for technical products: the person others ask whether your product is any good.
Leave purchasing until later. Buyers place orders once a line is approved, but they rarely approve it.
I build lists from the titles each niche actually uses, and I strip generic titles such as Manager, Assistant and Associate out of the search. A distributor full of "account managers" will burn your sequence on people who cannot say yes.
Start the list from your own customers. My first step is always the existing buyers, then lookalikes of those buyers. For a manufacturer, that means asking your 20 best customers where they buy the products that sit next to yours. The distributors they name already serve your buyers.
Then look for distributors with the same profile in other regions. If those regions are abroad, start with the way exporters find distributors in a new market.
What should the pitch to a distributor say?
A distributor reads every pitch with one question in mind: what does this do for my business? Answer it in this order.
- Their money: gross margin per unit and per typical order, from your margin math.
- Proof of demand: customers in their territory who already buy from you, reorder rates, and inquiries you could not serve.
- Fit with their range: which existing lines yours sits next to, and why it does not compete with their best sellers.
- Your support: training, sales material and a named contact.
- A small next step: a pilot with clear limits.
In a first message I sell only the meeting, never the catalogue. Pitching the whole line to a stranger is the fastest way I know to get ignored. The five-part pitch belongs in the meeting. The message only has to earn that meeting, and in the sequence below it does that with one money figure and one sign of local demand. Name past customers in it.
The pilot. A pilot is something you design and offer, and nothing requires you to run one. This version is easy for a distributor to accept:
- A narrow SKU set: the 3 to 5 products that sell fastest when you sell direct.
- One or two branches, chosen where your demand proof is strongest.
- One agreed success metric, such as reorders or units sold through to end users.
- A length of at least two of your normal reorder cycles. A 90-day pilot is easy to explain, but if customers reorder every two months, 90 days shows you only one reorder.
- Written exit terms that say what happens to unsold stock if the pilot ends.
Support after signing. Support decides whether a listed line actually moves. Agree on it before the pilot starts:
- A short training session for branch reps, recorded for new hires.
- A one-page sales sheet covering who buys the product, why they buy it, the price and the margin.
- One named contact at your company who answers rep questions the same day.
- A monthly sell-through review with the branch manager.
How do you reach a distributor with no warm intro?
Many manufacturers wait for an introduction or a trade show instead of writing to distributors cold.
Cold email and LinkedIn reach a category manager the same way they reach any other B2B buyer. A distributor list is short and sits close to your product, which makes every message easier to make specific. How this compares with exhibiting is a fair question, and outbound for manufacturers versus trade shows looks at it.
The sequence below opens on LinkedIn, so the name in the inbox is already familiar when the first email lands. A category manager will also look you up before replying. The email alone never closes a sale. They buy after they have audited you, so check that your profile and website say what the email says.
I have seen this play out. Same message, two senders. One got 2% replies, the other 7.5%. The difference sat in the foundations behind each sender.
For one category manager:
| Touch | Channel | Purpose | Ask |
|---|---|---|---|
| 1. Connection request | Put your name and face in front of the category manager before any email | Accept the request, with at most a one-line note naming their range | |
| 2. First email | Show the distributor's money per order and one sign of local demand | A 20-minute call | |
| 3. Short message | A human note with one new fact, such as a reorder from a customer in their area | A reply, or the name of whoever owns the category | |
| 4. Follow-up email with a proof line | One result the manager can check | A call about a two-branch pilot | |
| 5. Final short email | Close the loop politely and leave the door open | The right contact, or a better month to come back |
The table shows five touches. Plan 5 to 6 across channels, and make the sixth a second contact at the same distributor, usually the branch manager.
In my team's sequences, it is usually the third follow-up that gets the answer, once enough time has gone by since the second. So do not judge the sequence on its first two touches.
If some of your distributors sit in Germany, Austria or the Czech Republic, change the channel there. We do not cold email those markets without a compliant basis, and we use LinkedIn instead.
Here is a made-up example of touch 2:
Subject: Reorders on stainless cable tray in Warrington
Hi Sarah, you run the electrical containment range across your North West branches. We make stainless cable tray in Sheffield, and three contractors who buy from your Warrington branch already order tray from us direct. At our trade price, your gross margin on a typical order would be about GBP 410. Would a 20-minute call next week be useful, to see whether a two-branch trial makes sense?
One range. One branch. One money figure. One small question. That is the whole email.
In our campaigns, reply rates run near 1%. At thousands of emails a day they fall to about 0.5%. From 10% to 50% of replies lead to meetings.
At the other end, tightly targeted and heavily personalized campaigns can reach 15% to 17% replies, where roughly 75% of the people who answer show interest. Those averages slide as volume goes up. These are ranges from our campaigns, and yours will depend on your list and offer.
Distributor lists are small, so the maths looks different. Say your market holds 150 distributors that fit, and you reach 2 people at each over one full sequence: 300 people -> about 3 replies at a 1% rate -> perhaps 1 meeting.
That is a small list, and generic copy will burn it. My rule is simple: volume negates luck. With 150 targets you do not have the volume, so every email has to be right. Write each one for one category manager and one range.
What terms belong in a distribution agreement?
Write these down as plain commercial terms first, before anyone turns them into a contract. The right-hand column flags the items that the next section limits by law.
| Term | What to write down | Limited by EU law? |
|---|---|---|
| Territory | Regions or customer groups the distributor covers | Yes, Art 1(1)(h) and Art 4 |
| Product scope | Which SKUs are in, and how new ones get added | No |
| Pricing and volume tiers | Transfer price, tier breaks, how price changes are announced | Yes for resale prices, Art 4(a) |
| Minimum purchases or performance targets | Units or revenue per quarter, and what happens if they are missed | No |
| Exclusivity and competing lines | Whether the distributor may carry rival products | Yes, Art 5 |
| Stock and returns | Stock levels per branch, return rights, damaged goods | No |
| Marketing support | Training, sales sheets, samples, any co-funded activity | No |
| Sell-through reporting | Units sold per branch per month, and the format | No |
| Term and termination notice | Length, renewal and notice period | Yes, if a non-compete runs with it, Art 5 |
| Pilot exit | What happens to stock and listing when the pilot ends | No |
Getting the meeting and signing the distributor are two different jobs, and I keep them apart in every plan. Outreach can put a category manager in front of you. After that, your own sales lead has to negotiate margin, territory and the pilot exit, and then close. If nobody on your side owns that conversation, a booked call is worth little until a sales lead closes it.
What does EU competition law forbid in a distribution deal?
Regulation (EU) 2022/720, the Vertical Block Exemption Regulation, sets out which supplier-distributor agreements are automatically exempt from the EU ban on anticompetitive agreements. The EUR-Lex summary of the guidelines on vertical restraints explains how the exemption is applied. I read both sources at the time of writing.
The 30% market share test
The exemption applies only if neither the supplier's nor the buyer's share of the relevant market exceeds 30% (Art 3). Market shares are in principle calculated on value data. Substantiated estimates are allowed if value data is missing. Above the 30% line there is no automatic exemption, and the agreement needs its own legal review.
Resale prices
A supplier cannot fix the distributor's resale price or set a minimum one. Restricting a buyer's ability to set its own sale price is a hardcore restriction (Art 4(a)). You may set a maximum price or recommend a price, as long as it does not work as a fixed or minimum price in practice.
Territories and customers
The guidelines summary treats restrictions on where a buyer may sell, or to whom, as hardcore. A hardcore restriction takes the whole agreement out of the exemption.
The regulation does allow an exclusive distribution system. A supplier may reserve a territory or customer group for itself alone, or for up to 5 buyers (Art 1(1)(h)). How far that territory can then be protected is governed by the narrow exceptions in Article 4. Read that article with counsel before you write the territory clause.
Non-competes
A non-compete obligation loses the exemption if it is indefinite or exceeds 5 years (Art 5(1)(a)). After the agreement ends, a non-compete is limited to 1 year, and only under strict conditions (Art 5(3)). If you want a distributor to carry no rival lines, give that obligation a fixed term.
Agents
If your partner acts as an agent and takes no significant economic risk, the summary says the agreement generally falls outside Article 101(1).
How long these rules apply
The regulation has applied since 1 June 2022 and expires on 31 May 2034 (Art 11).
Take your terms table to competition counsel before you sign anything. Everything in this section is cited from the regulation and its official summary, and none of it is advice on your specific agreement. These are EU rules; the UK applies its own, which this article does not cover.
Trying to get a distributor to take on your product? Tell me the market on a call and I can help with the first list and message.
Questions manufacturers ask about distributors
What is a distributor line card, and how do you get onto one?
A line card is the list of brands and product lines a distributor carries. Its reps hand it to customers, and many distributors also post it online. You get onto it by passing the category manager's review, usually after a pilot proves sell-through. Ask when the next review is.
Can a manufacturer keep selling direct after signing a distributor?
Yes. Decide which accounts stay with you and list them by name in the agreement. Agree a rule for quoting the distributor's own customers, so the distributor is never undercut by surprise. In the EU, Article 2(4)(a) keeps the exemption for a manufacturer that also sells downstream, under conditions.
Should a manufacturer pay distributor onboarding or marketing fees?
Some distributors ask for a listing or marketing fee. Treat it as part of your margin math: add it to the cost of the line and rerun your floor price. If you agree to pay, tie the money to something measurable, such as a fund released per unit sold through.
Do these rules apply if I only sell to distributors outside the EU?
The block exemption is an exemption from Article 101 of the EU treaty, which covers competition affecting the EU market. If your distributor buys and resells only in the US or the UK, those countries' own rules apply, so check them with local counsel. If any part of its territory or customer base is inside the EU, assume the EU limits matter.
So the order of work is simple: price first, list second, message third, contract last. Fix the offer first. Then send.
