RB2B Review: Pricing, Visitor Coverage and Legal Limits

    Short answer

    What RB2B really sells, what a named visitor costs, where the law bites, and what to do with the name once the Slack ping arrives

    Artem Smirnov
    Artem Smirnov

    Last updated · 11 min read

    Artem Smirnov in a dark suit against a charcoal studio backdrop, next to the line 'RB2B REVIEWED ON PAPER. A name in Slack is not a meeting'

    RB2B is a script you add to your website. It tries to identify who reads your pages and posts each match to Slack. It can match companies worldwide, and it names individual people only when they browse from the US.

    My verdict: test it if you get steady US buyer traffic and someone answers every name within a day. Skip it if your visitors are mostly British or European. Then you pay for company names nobody can write to.

    A disclosure before the details: the meetings my team books come mostly from cold email and LinkedIn, and what follows is a desk review of a tool I have not run hands-on. It rests on RB2B's own pricing and FAQ pages, the regulator texts that apply to it, and published material.

    I judge any signal tool by the first message a rep sends after the signal. Prospects rarely decide from the email itself. They look you up first, so that message and the profile behind it carry most of the sale.

    Is RB2B worth it?

    RB2B is a real product with public list prices, monthly plans and a free plan you can keep. Whether it pays off depends on three conditions:

    • Steady US traffic from people who could buy, because named-person data covers US visitors only.
    • Enough coverage. On the two cheaper paid plans, the vendor's own pricing page shows the tool naming only a small minority of those visitors. Other vendors report the same pattern. Demandbase's 2024 analysis put 77 of every 100 visitors in a single bucket of company-level visitors and bots. That bucket holds no named people, and it is vendor data, not an independent test.
    • Someone who acts on each name within a day.

    If your whole market fits on a list you could write today, skip the tool. Put the money into outreach to that list.

    How much of my traffic will RB2B actually name?

    RB2B publishes several coverage figures, and they measure different things. Side by side, they look like this:

    ClaimFigureWhere RB2B states itWhat it counts
    Pro+ identification ("up to", average)70-80% of trafficFAQPeople and companies combined
    Starter and Pro identificationAround 30-40%FAQHigher than the pricing-page contact band for the same plans
    Contact level on Starter and Pro15-20% coveragePricing pageUS visitors only
    Contact level on Pro+35-45% coveragePricing pageUS visitors only, labeled premium resolution
    Company level on Starter and Pro15-20% coveragePricing pageGlobal
    Company level on Pro+35-45% coveragePricing pageGlobal

    All six rows are RB2B's own figures, taken from its FAQ and its pricing page at the time of writing. Neither page explains how the figures were measured, so treat every row as vendor data.

    The FAQ figures are roughly double the pricing-page bands for the same plans. On Starter and Pro, the contact and company bands add up exactly to the FAQ figure. On Pro+, they add up to 70-90%, a band that overlaps the FAQ headline. Those sums suggest the FAQ figures count people and companies together, so never budget named people from them.

    A company match tells you someone at a firm read your page. Only a person match gives you somebody to write to. So for named people, budget with the contact-level rows of the table. That is the figure tied to the plan you will pay for.

    Geography cuts the number again. The FAQ calls person-level ID "US-only technology". A visitor from London, Dublin or Toronto comes through as a company at most. If most of your buyers sit outside the US, the person-level band applies only to the minority who are inside it.

    If a review complains that RB2B names only a fraction of traffic, the table above explains why. Most search results for this tool are user threads and review sites. I do not quote them, because I could not check them. If you read them, give weight to teams that look like yours: similar monthly traffic, a similar US share, and a rep who follows up the same day.

    How much does RB2B cost per identified visitor?

    PlanMonthly priceResolutions includedNamed US peopleBusiness emailsOverage per resolution
    Free$0150No, company level onlyNoNot listed
    Starter$79300Yes, as LinkedIn URLsNo45 cents
    ProFrom $149From 600, tiers up to 2,500YesYes25 cents
    Pro+From $199From 600, tiers up to 2,500,000Yes, premium resolutionYes25 cents

    Prices and limits are from the RB2B pricing page and FAQ. Vendor prices change often, and Pro and Pro+ scale with the resolution tier you pick, so price the tier you will really need.

    The pricing page offers a 7-day free trial of Pro, and the free plan has no end date. The free plan shows which firms visit, but it gives you nobody to write to. On Pro and Pro+, extra domains cost $99 a month, for up to 5.

    The included rate per resolution at entry level:

    • Starter: $79 / 300 is about 26 cents.
    • Pro: $149 / 600 is about 25 cents.
    • Pro+: $199 / 600 is about 33 cents.

    Starter's overage runs about 1.7 times its included rate. On Pro, overage roughly matches the included rate, and on Pro+ it sits below it, so a traffic spike costs the most on the cheapest paid plan.

    Neither page gives company matches a quota of their own, so plan as if company matches and named people draw on the same pool. Neither page says unused resolutions carry over, so plan as if they expire at the end of each month.

    A resolution is a match, and a match is a long way from a buyer. So price only the names you can use:

    Cost per useful name = monthly fee / (monthly visitors x US share x person-level coverage x share that fits your ideal customer profile, or ICP)

    The bottom half of that formula is where the 25-cent figure falls apart on a small site.

    Does RB2B make sense with small traffic or a small market?

    Take a B2B site with 1,500 visitors a month, half of them from the US.

    • That gives 750 US visitors.
    • At the Starter and Pro contact band, you get about 110 to 150 named people a month.
    • Spread over those names, the Starter fee works out at about 53 to 72 cents each and the Pro fee at about $0.99 to $1.35 each.
    • At the Pro+ band, the same 750 visitors give about 260 to 340 names, at roughly 59 to 76 cents each, if the entry Pro+ quota covers your volume.

    On a site this size, traffic sets the ceiling. The pricier Pro+ plan can come out cheaper per name than Pro. And because company matches for the other 750 visitors draw on the same pool, Starter's included resolutions could run dry in a busy month.

    None of those names is a lead yet. Strip out students, job seekers, competitors checking your pricing, current customers, suppliers, and anyone from the wrong country or company size. Only what is left counts. On a small site, that list is short.

    Now flip it around. Say your whole market is about 2,000 companies. A tool that waits for visits only sees the few that happen to arrive.

    If I can find buying signals on only around 10 of those 2,000, I drop intent data and write an offer every company on the list could answer. Signals earn their place in big markets. In small ones, the offer and the list do the work.

    A visitor tool still has one job in a small market. When a target account lands on your site, the rep who owns it moves it up the queue. Everyone else on the list still needs a message.

    Our FAQ on lists and targeting explains how we build that list. A heavier account-based intent platform suits a different buyer, as my Demandbase review shows.

    What follows is my plain reading of the texts and no substitute for a lawyer.

    United States: the CCPA

    California's privacy law applies to a for-profit business that meets any one of these thresholds (Cal. Civ. Code 1798.140):

    • Annual revenue over $25,000,000. The statute adjusts this for inflation, so check the current figure.
    • Buying, selling or sharing data on 100,000 or more consumers or households.
    • Earning 50% or more of annual revenue from selling or sharing personal information.

    Business contacts get no carve-out. The California Attorney General states that the exemption for business-to-business personal information expired on December 31, 2022 (California AG, CCPA). Under the statute, any California resident who is a person counts as a consumer, so a VP of Sales in San Diego counts.

    The statute's definitions cover what visitor identification handles. Personal information includes an IP address, an email address, professional or employment-related information, and browsing history. Unique identifiers include cookies, beacons and pixel tags. A named visitor record built from a site visit sits inside those definitions.

    If a covered business sells or shares personal information, the AG's guidance requires three things:

    • A "Do Not Sell or Share My Personal Information" link.
    • Honoring Global Privacy Control signals as a valid opt-out request.
    • Acting on an opt-out within 15 business days at most.

    The statute and the AG page do not say whether resolving visitors through a vendor counts as selling or sharing. Take that question to counsel before you install the script, especially if you clear any of the thresholds.

    United Kingdom: PECR and the ICO

    The Data (Use and Access) Act 2025 substituted a new regulation 6 of PECR on 5 February 2026. It says a person must not store information on a user's device, or gain access to information already stored there, unless an exception in Schedule A1 applies. Gaining access includes collecting or monitoring information that the device emits automatically (PECR regulation 6).

    The ICO finalized its guidance on storage and access technologies on 29 April 2026. It includes a chapter on what to consider when you use someone else's technologies on your own online service (ICO guidance).

    A third-party script reading UK visitors is the case that chapter deals with, even though RB2B names no UK individuals. RB2B's own FAQ asks customers who run company-level ID worldwide to add consent collection.

    EU visitors

    For EU traffic, the one document to read with your lawyer is the EDPB's Guidelines 2/2023 on the technical scope of Art. 5(3) of the ePrivacy Directive.

    Our own outreach follows the same split. In Germany, Austria and the Czech Republic, we need a lawful basis first. Only then does a cold email go out. Where we lack one, my team switches to LinkedIn. The email side of that question is whether cold email is legal.

    What do I do with the name after the Slack ping?

    Work through these steps before you send anything to the name that just landed in Slack:

    1. Check fit. Compare the company's size, industry and region against your ICP. If it misses, archive the name and move on.
    2. Check the person. Ask whether they decide on, or shape, a purchase like yours. A junior reading your blog is just a reader. Look at who actually made the decision on your past deals, and match titles to that, not to a generic manager title.
    3. Audit yourself first. The person will look at your profile and website before replying. Open your own LinkedIn profile in a logged-out window and read it as a stranger would. We ran identical copy for two companies. One got 2% replies. The other got 7.5%. Same copy, different sender. A ghost profile sinks even perfect copy. A strong profile carries a weaker message. Fix the profile before you touch the copy.
    4. Open on LinkedIn with something about their business. A hiring wave, a new site or a contract they announced beats a compliment. Before you scale this step, check how many requests and messages LinkedIn allows.
    5. Never mention the visit. Nobody likes hearing they were watched. It also keeps the tracking out of your first impression, though it does not settle the privacy questions above.
    6. Leave the pitch out. A sales pitch in a first message to a stranger is the quickest way to get ignored. Ask for a short conversation and delete every line that asks them to buy.
    7. Write the follow-ups before the opener. A single message will not carry a new contact. Plan the whole sequence first, and use both email and LinkedIn where you can.
    8. Log it. Put the name in your CRM with one owner, so two reps never write to the same person. Put one person on replies as well, so no answer sits unread.

    Below is an invented first email to a US contractor whose Phoenix operations lead showed up in Slack:

    Subject: estimators in Phoenix

    Hi Dana, I noticed Ridgeline has three estimator roles open in Phoenix, which often means bids are piling up faster than the team can price them. We build takeoff software for general contractors in the Southwest, and that backlog is the problem we spend most of our time on. Is a 15-minute call next week worth your time? You would leave with a view of where takeoff time goes on bids like yours, even if you never buy from us.

    Who should buy RB2B and who should skip it?

    Your situationVerdictWhy
    Steady US traffic from buyers, and a rep who follows up within a dayBuy ProYou need business emails, and the tool only pays off if names turn into conversations
    Mostly UK or EU trafficCompany level only, so weigh it carefullyNo named people, plus consent tooling on every page
    Under about 1,000 visitors a monthStart on the free plan and measureCount fitting company matches for a month before paying for names
    A small named market you could list todaySkip it and run outbound to the full listWaiting for visits covers a fraction of a list you already have
    Nobody to follow up within a daySkip itAn unanswered Slack alert is a monthly fee for nothing

    A visitor tool gives you a trickle of warm names. Someone still needs the time to answer them and take the calls they turn into, or the system cannot work. If your outbound does not convert yet, fix the funnel first. Then scale.

    50 to 100 perfect-fit names a month is not a plan. Busy. Not ready. Not interested. Betting your pipeline on that is a coin flip.

    You need quality and volume together, so the visitor names should sit on top of a full outbound list, never replace it. Our campaigns book 30 to 35 sales calls a month. That takes contact with at least 10,000 people monthly. A small site's visitor feed is far too thin for that.

    For a quick price check: Albacross advertises plans from EUR 59 a month billed yearly (Albacross pricing). Leadfeeder lists its plans on its pricing page, where the entry plan was EUR 79 a month billed annually when I checked. ZoomInfo and Demandbase publish no list price and quote on request.

    Budget for the follow-up first

    The meeting comes from the message you send next and the follow-ups after it. Fund that work before you pay for a single resolution. If RB2B does not fit your traffic or your market, other tools in the RB2B alternatives list may suit you better, and the wider field of website visitor identification is worth a look.

    If you are weighing RB2B against a plain outreach sequence, book a call and tell me your monthly traffic so I can say whether it is worth testing.

    Questions founders ask about RB2B

    Is RB2B legit and safe to install on my site?

    RB2B states that it holds SOC 2 Type II certification, an independent audit of how a vendor protects data (RB2B FAQ). That audit covers RB2B's own security controls. It says nothing about whether your use is lawful, so load the script through your consent tool like any other tag, which also lets you switch it off cleanly.

    What should I say if a prospect asks how I found them?

    Never raise the visit first, but if asked, say plainly that they visited your site and a vendor matched the visit. California residents can also file a request to know what you hold. The AG's guidance gives you 45 calendar days to respond, extendable by another 45 (California AG, CCPA), so keep those records easy to find.

    Do I need to update my privacy policy and cookie banner before adding RB2B?

    Talk to counsel before launch. If you rely on consent, note how the CCPA defines it: freely given, specific, informed and unambiguous (Cal. Civ. Code 1798.140). The statute also says agreement obtained through dark patterns does not count, so a banner built to trick visitors into clicking accept fails the definition.

    How many meetings can I expect from identified visitors?

    RB2B publishes no meeting rate. In our cold email work, replies usually land near 1%, nearer 0.5% at thousands of sends a day, and 10% to 50% of replies book a meeting. Those ranges come from our cold email work and say nothing about RB2B.

    On a few dozen fitting names a month, those ranges can mean zero meetings, so each name needs a full sequence, and a booked meeting is still not a signed contract.

    Does RB2B work without Slack?

    Partly. Chat alerts go to Slack on every plan, per the FAQ on the RB2B pricing page. The other integrations, including CRMs and enrichment tools, sit on Pro and Pro+ only. If you want matches to land straight in your CRM or sequencing tool, the free plan and Starter will not do it, so budget for Pro from the first month.

    Want to see what we would build for your company?

    I am Artem Smirnov. I help established B2B companies build and run the go-to-market system behind their pipeline, from outbound to AI search visibility. Book a call and we will see what fits yours.

    Artem Smirnov
    Artem Smirnov

    I help established B2B companies build and run their go-to-market systems. 9 years in outbound, 10,000+ campaigns.