What is the one job of a first email to a buyer?
Pitch your product in the first message and you get silence. A first email to a potential buyer has one job: get a reply that can turn into a conversation. My first message sells that and nothing else. In practice, the email is four to six plain sentences built like this:
- Open with something true about the buyer's company right now.
- Name one problem that this person owns, in the words their job uses.
- Show one real result from work like theirs, with a number and a timeframe.
- Ask one small question they can answer in a line.
Keep the subject line short and honest. Drop the greeting filler, the company history and the service list. Before it goes, check three things: the address is real, the sender is set up properly, and the email meets the legal minimum for the buyer's country.
Buyers have little patience for emails that miss. Gartner questioned 632 people involved in B2B purchasing between August and September 2024. In results published in June 2025, 73% said they steer clear of suppliers whose outreach is irrelevant to them (Gartner). So an irrelevant email can cost you more than the reply. It can cost you the account.
Why do buyers answer one sender and ignore another?
Nobody buys from an email. A buyer commits only after researching the sender. Before answering, a buyer opens the sender's LinkedIn profile, the company website and whatever proof sits there. If that check goes badly, you get silence. Nobody writes back to tell you why.
The outside data points the same way. 6sense's 2023 research of 934 buyers found buying groups finish about 70% of their buying journey before they engage a seller. The same research found early direct outreach from sales reps made no difference. Buyers did not respond until their own research was done.
I have seen one email go out from two companies. Word for word. One sender got 2% replies, the other 7.5%. Who sent it was the only difference.
So when a campaign goes quiet, I look at the list and the sender BEFORE I touch the words. No rewrite will rescue a list of the wrong people or a sender nobody can find online.
What reply rate is realistic?
Across my team's campaigns, a reply rate of about 1% is usual, and at large scale, thousands of emails a day, it often sits around 0.5%. At the other end, narrow, line-by-line personalized campaigns have reached 15% to 17%, and about three in four repliers were interested.
Between 10% and 50% of replies usually end up as booked meetings. For an SEO agency in Singapore, my team booked 78 sales meetings in the first 30 days.
More volume always pulls the averages down. They describe our campaigns, and your numbers will move with your market, your offer and your sender.
For one email to a buyer you picked by hand, the high end is only realistic when every line is written for that person.
Which email fits where your buyer stands?
A stranger and a buyer a colleague just introduced should not get the same first email. What changes with the stage is how you open, what proof you bring and how big the ask is.
In my campaigns, the email ideally lands after a LinkedIn touch, so the buyer has already seen the name and the face.
| Where the buyer stands | Opening line | Proof to include | Ask |
|---|---|---|---|
| Never heard of you | One true fact about their company this month: a won project, a new site, a new hire | One result from a buyer like them, with a number and a timeframe | A question about whether the problem is live for them |
| Connected or engaged on LinkedIn | A one-line reference to the real exchange: the accepted request, their reply, a post they wrote | The same kind of result, matched to what they said on LinkedIn | A short call with a stated purpose |
| Referred by someone they trust | The referrer's name and why they suggested you, in the first line | What you did for the referrer, if the referrer agrees | A specific day and time for a call |
| Past lead going quiet | What has changed since you last spoke | Something new: a fresh result or a fact about their market | One question they can answer in a word |
The decision rule: the colder the buyer, the smaller the ask. A referred buyer can be offered a time slot. A stranger gets a question. If you are unsure which row a buyer sits in, use the colder row. Conversations come first. Calls come out of conversations. Clients come out of calls.
How do you write the email line by line?
Picture one reader: a procurement lead at a large contractor, with a full inbox, who will look you up before replying.
Use the four parts from the top, in order, and size the ask with the stage table.
Plain beats polished. In our campaigns, an email that reads like one person wrote it gets further than a template.
What makes a good opening sentence?
A good opening sentence proves in a few words that the email is about them. For a buyer at a contractor, that could be:
- "Saw your team won the two school extensions in Leeds starting in March."
- "Your new depot in Doncaster goes into the planning system next month."
- "You took over procurement for the northern region in September."
Weak openers spend the most-read line on you or on nothing: "Hope you are well", "My name is...", "I came across your company and was impressed". If you cannot find one true fact to open with, you are not ready to email that buyer.
Before: the draft most suppliers send
A made-up example. A UK supplier of site welfare cabins (canteens, drying rooms, toilet blocks) writes to the head of procurement at a regional main contractor. Here is the first draft:
Subject: Partnership opportunity
Hi James,
Hope you are having a good week. I'm Sarah and I look after new business here.
Founded in 2009, we are a leading, trusted provider of welfare units, canteen cabins, drying rooms, toilet blocks, security cabins and office units across the UK, with a fleet of over 1,200 units.
We would love to explore how we could become your preferred supplier on upcoming projects. Our pricing is very competitive and we deliver nationwide.
Would you be up for a short call sometime?
Kind regards, Sarah
What I cut, and why
My delete pass always runs in the same order: the pitch first, then the service list, then the vague ask. Here is each line of Sarah's draft and what happens to it.
- "Partnership opportunity." Says nothing about James's work and reads like a mass send. Replaced with the name of his project.
- "Hope you are having a good week." Filler in the line he reads first. Cut.
- "I'm Sarah and I look after new business here." Her name already shows in his inbox. Cut.
- "Founded in 2009... over 1,200 units." Company history. It makes the sender feel legitimate, but James decides that later, on her website and profile. Cut.
- The list of six products. James needs one. A list makes him work out which, and he will not bother. Cut down to one product.
- "Leading, trusted provider." Anyone can claim those words. Replaced with one result he can check.
- "Become your preferred supplier." This is the pitch. It asks a stranger to make a supplier decision from one email. Cut first.
- "Our pricing is very competitive." A claim with no number, and it pulls the talk toward price before there is any talk. Cut.
- "Would you be up for a short call sometime?" No purpose, no time, no reason to say yes. A call that is free for Sarah still costs James 15 minutes of a full week, so it has to be sold.
After: the rewrite
Subject: Welfare cabins for the Leeds school jobs
Hi James,
Saw your team won the two school extensions in Leeds that start on site in March.
On school jobs, cabins that arrive late can hold up the first week, right when the site team is stretched.
Last year we had cabins in place before day one on 4 school projects in West Yorkshire.
Is late cabin delivery something you plan around on those jobs? If it is, I can send the lead times we can hold for a March start, so you can check them against your schedule.
Sarah
That is about 90 words. It names one product, one problem and one result, and it asks one question James can answer in a line. What is on offer is lead times for his own start date, which is small enough for a stranger to say yes to.
I always put a real past result inside the message itself, because a number the buyer can check does more work than any adjective. The "4 school projects" line is invented for this example. In your email, that line has to be a job you actually did, with its real number and timeframe.
What subject line should you use for a buyer you have never met?
Write the subject line last, and make it describe the email honestly. Label it the way a colleague would label an internal message: the project, the site or the problem. Under eight words is plenty.
Good examples for James: "Welfare cabins for the Leeds school jobs", "Lead times for your March start", "Question about the Doncaster depot". Weak ones: "Quick question", which tells him nothing, and "Partnership opportunity", which looks like a newsletter.
Never fake a thread. According to Google's sender guidelines, a subject line should not start with Re: or Fwd: unless the email really is a reply or a forward (Google Workspace Admin Help). A buyer who spots a fake "Re:" has a reason to distrust everything below it.
Test subject lines instead of agonizing over them. My team tests subject line variants side by side, because the more you test, the sooner a winner shows up. On your own sends, write two subject lines and send each to a comparable segment: same titles, same company size, same market, same body, same week. Change one thing at a time and judge the winner on replies.
What does the law require in a cold email to a business?
Here is the legal minimum for the two markets most B2B senders start with. It comes from the regulators and the statute text, as read at the time of writing. This is not legal advice.
| Buyer | What the rule says | What your email needs |
|---|---|---|
| Any business in the US | CAN-SPAM has no B2B carve-out: a company inbox is covered, and so is every commercial message, bulk or one-to-one | Accurate header information, a subject that reflects what the body says, a clear and conspicuous ad disclosure, your valid physical postal address, and an easy opt-out method |
| A UK company (corporate body) | No PECR consent is needed to send B2B marketing email to a corporate body (ICO) | Your real identity and a valid address where the business can opt out or unsubscribe |
| A UK sole trader or some partnerships | Treated as individual subscribers: marketing email needs consent, or the soft opt-in under regulation 22 of PECR | Consent, or details obtained during a sale or negotiations for a sale, marketing only similar products and services, plus a simple, free way to refuse in every message |
In the US, the FTC's guide says you must honor opt-outs within 10 business days, and the opt-out method must keep working for 30 days after the message goes out. The same guide lists a civil penalty of up to $53,088 for each email that breaks the rule. The FTC adjusts that figure for inflation, so check the current amount.
According to the ICO, UK GDPR covers an address like initials.lastname@company.com because it identifies a person, whereas a generic info@company.com address falls outside it. When you collect personal data from another source, such as a public one, the ICO says you must give privacy information within one month of collecting it.
A business contact's right to object to direct marketing is absolute. Keep their details on a suppression list instead of deleting them, so they never get emailed again. If you cannot tell whether a UK contact is a company or a sole trader, the ICO says to treat them as an individual.
One caution for UK senders: the ICO notes this page is under review because of the Data (Use and Access) Act, so the details may shift. Read it again before a big send.
Europe needs more care. When a buyer sits in Germany, Austria or the Czech Republic and we have no compliant basis for email, my team switches that buyer to LinkedIn.
What should you check before you hit send?
A buyer at a large contractor will spot a misspelled project name at once, and a broken sender setup lands you in spam before anyone reads a word. Run every first email through this table.
| Check | Why it matters | Pass test |
|---|---|---|
| Address verified | Bounces damage your sending reputation and show the list is stale | Verified by a tool before sending; bounces stay under 0.5% of sends |
| SPF and DKIM set | Google requires SPF or DKIM from all senders to Gmail; above 5,000 messages a day it requires SPF, DKIM and DMARC | Your sending domain passes authentication |
| Display name | Google's guidelines say not to put the recipient's name in your display name or to imply a reply | Your real name, plus your company if you like |
| Subject line honest | A subject that misdescribes the email breaks trust and the US rule above | It names what the body is about; no fake Re: or Fwd: |
| One ask | Two asks split the answer, and the buyer picks neither | One question in the whole email |
| Read-aloud time | Long emails get skimmed or skipped | Under 30 seconds out loud |
| Names spelled right | A wrong name or project tells the buyer it was a mass send | Name, company and project checked against the source |
| Legal minimum | The rules differ by country and by type of business | You have checked the legal table above for this buyer's country |
| Sender checks out | The buyer will look you up before answering | Your profile and website tell the same story as the email |
My team verifies every address before a single send and keeps bounces below 0.5%. If your bounces run higher, the problem sits upstream of the email.
On every new sending domain, configure SPF, DKIM and DMARC ahead of any volume. Do it even if you only plan to send ten emails by hand.
Try it tomorrow morning on one buyer. Open their company news, write the first sentence from something true you find there, and build the other three lines on it.
Got a buyer in mind and a first email that still does not feel right? Let's work out the opening line together on a call.
Other questions about writing to a buyer
Should you put links or attachments in a first email to a buyer?
Leave attachments out. A brochure is usually the pitch you just cut, and an unexpected file from a stranger gives the buyer one more reason not to open the email. One link is fine, ideally in your signature, pointing to a page that backs up the result you quoted. Save decks, spec sheets and price lists for after the buyer replies and asks.
How long should you wait before sending a second email?
Leave real gaps between messages. I do not give a fixed day count, because it depends on the buyer's market. In our campaigns, the reply often lands on follow-up number three. Most senders stop before that point. So plan the whole sequence before the first send, and give each follow-up one new reason to answer.
Should you email the CEO or the department head first?
Email the person who actually signed off on jobs like yours before. Go through your own past projects, note who made the final call each time, and target that title at the new account. At a contractor buying site equipment, that may be procurement or the project director; at a small firm, it may be the owner.
Should you mention price in the first email?
No. Price needs context the buyer does not have yet: scope, volume, timing. A number in a cold email gets compared with whatever they pay today, and that comparison can end the conversation before it starts. If the buyer asks about price in their reply, give an honest range and use it as the reason to book the call.
