Warmly Alternatives That Cost Less, and When to Skip Them

    Short answer

    A neutral way to choose a cheaper visitor identification tool by traffic, market size and consent rules, and why none of them replaces outbound

    Artem Smirnov
    Artem Smirnov

    Last updated · 14 min read

    Artem Smirnov in a dark suit against a charcoal studio backdrop, next to the line 'WARMLY ALTERNATIVES. Cheaper tools, same question first'

    For most small B2B teams, the cheapest real alternative to Warmly is a company-level visitor identification tool with a free tier and a low monthly entry plan. Leadfeeder is the clearest example. It has a free plan, its paid plans scale with the number of companies it identifies, and naming a visiting company uses no credits (Leadfeeder pricing).

    That replaces the identification part of Warmly: a list of companies that came to the site. Chat and AI agents are a separate purchase. If you want them, price them on their own, against how many visitors your team can really talk to.

    Before you buy any of it, answer one question. Are your traffic and your market big enough to produce signals worth acting on? If they are too small, the cheapest alternative is no tool at all.

    A disclosure, because many comparison pages for this search come from vendors of visitor identification or sales tools. My team books meetings for B2B clients by cold email and LinkedIn and sells no visitor identification tool, so no row below benefits us. Our result numbers come from email and LinkedIn only.

    Prices come from each vendor's own pricing page. Legal rules come from the regulator or the legislation.

    What does Warmly bundle that you might not need?

    Warmly sells visitor identification packaged together with website chat and AI agents that engage inbound visitors. Warmly's pricing page stacks those parts into three plans: identification alone, then chat on top, then an AI inbound autopilot on top of that (prices in the table further down). If Warmly feels too expensive, check whether you are paying for all three parts and using one.

    So before you compare anything, write down what your team actually used last month. Make three short columns:

    1. Identification. Who opened the list of visiting companies, how often, and what they did with it.
    2. Chat. Who answered live chats, at what hours, and how many chats became meetings.
    3. AI agents. Which automated plays ran, and whether anyone read what they produced.

    If only the first column has a name in it, a company-level identification tool can replace your Warmly setup. If a person answers chat every working day and it books meetings, you are shopping for a chat product as well.

    An empty third column is automation nobody checks, and the easiest line on the invoice to cut. Plenty of teams play with AI tools. The ones that get value build the whole flow end to end, and an agent nobody reads is not that.

    Should you buy a visitor identification tool at all?

    These tools exist for a real reason. Two in three buyers would rather skip the sales rep: 67% said they would prefer to buy with no rep involved when Gartner polled 646 B2B buyers between August and September 2025 (Gartner press release, 9 March 2026). Visitor identification tries to put a company name on the part of that research that happens on your site.

    Whether the name is worth paying for depends on two things: how many relevant visits you get, and how many companies could ever buy from you.

    My rule on signal tools is simple. I use intent data when the addressable market is large enough to carry it. Say your market is roughly 2,000 companies and only about 10 of them ever show a signal. I would NOT buy the tool there. I would write one offer that speaks to all 2,000, and send it to all of them.

    The same trade-off shows up in when intent data pays off for a small team, and in what to do instead when your market is small.

    Use this table to pick a route. Read it top to bottom and take the first row that matches. The rows are my own working heuristics for applying that rule, with no study behind them, and "conversations" means the result of the arithmetic in the next section, run on your own numbers.

    Your trafficYour marketRoute
    Any levelSmall, with signals on only a handful of companiesSkip the tool. Build an offer and a list that cover the whole market
    The next section's arithmetic gives less than 1 conversation a monthAny sizeSkip the tool. Fix the offer and the list before you measure visitors
    The arithmetic gives a few conversations a monthLargeFree tier as a one-month test
    The free tier produced conversations and you outgrew its limitLargeLow-cost company-level paid plan
    High, with the paid plan already producing meetingsLargeFull bundle, only if a person answers chat and works the signals every day

    Deal size moves the lines. If your deals are very large, one extra qualified conversation a month can justify a tool. If your deals are small, ask for more before you pay.

    The middle rows hide a trap: a handful of good accounts a month feels like progress. Even 50 to 100 perfect-fit leads a month is a weak bet, because any one of them may be busy, not ready or not buying right now. A handful of identified visitors is far fewer than that, too thin to carry a pipeline.

    How many conversations will a visitor ID tool really give you?

    Run the arithmetic before you sign anything. Every number below is an illustrative input, chosen to show the shape of the funnel. None is a vendor figure or a client result. Replace each one with your own.

    • Visits: 1,500 B2B visits a month, from your analytics.
    • Target-size share: 40% of those come from companies the size you sell to, giving 600 visits.
    • Named by the tool: 1 in 5 of those as a placeholder, giving 120 companies. Common Room's 2026 guide puts realistic company-level match rates at roughly 30-65% of US B2B traffic. That is a vendor's own figure, for US traffic. So 1 in 5 is a cautious start. Swap in the rate your own trial shows.
    • Fit with your ideal customer profile (ICP): 25% of the named companies match your industry and buyer, giving 30 accounts.
    • Replies: you find the right person at each one, run a full follow-up, and 1 in 10 replies, giving 3 conversations.

    In one line: 1,500 visits a month -> 600 from target-size companies -> 120 named -> 30 that fit -> 3 conversations a month.

    Three conversations, before a single meeting is booked. The tool plus the time to research and write to 30 accounts has to pay for itself out of those three. The naming rate is the least certain input, so replace it first.

    Consent is the second. If visitors must opt in before the script fires, only those who accept can be named, so the 1 in 5 can only shrink once your banner is live.

    If the chain produces almost nothing at your current traffic, do not assume more traffic or a better tool will rescue it. A funnel that leaks at small volume leaks at large volume too. Fix the leak first.

    Company-level or person-level identification, what is the difference?

    Company-level identification tells you which organization visited. You see a company name, maybe the pages viewed and how often, and nothing about the individual.

    Person-level identification claims to tell you which person visited, often with a name and contact details. Breakout, for example, lists both Company ID and Person ID among its features (Breakout pricing), and Leadfeeder reveals companies on Discover and adds verified emails and phones on Activate.

    With a company name, you still have to find the real decision-maker, verify an address and write a reason to reply. A named person saves that research but raises the legal stakes, because you now hold information about an identifiable human and need a lawful basis for using it.

    For a small team, a sensible order is to start company-level. Add contact data only for accounts that pass your ICP check, so you pay for the 30 good accounts and skip the 90 others.

    In most setups, yes. If the tool runs through a script or tag on your pages, it stores or reads information on the visitor's device, and both UK and EU law regulate exactly that step. UK law also counts collecting what a device emits automatically, so ask any vendor how its matching works. This is not legal advice. Use it to prepare the questions for your own adviser.

    The banner also shrinks what the tool sees. TAGGRS's 2026 consent benchmark puts the EU average consent rate at 68.8%. That covers all site types, not just B2B.

    The same TAGGRS page cites etracker data from Germany: around 40% consent where reject is as visible as accept, and up to 54% on other sites. Run your funnel math on the visits that consent, not your full analytics number.

    UK. Regulation 6(1) of the Privacy and Electronic Communications Regulations bars anyone from storing data on, or reading data from, a subscriber's or user's device, subject to Schedule A1 (legislation.gov.uk, regulation 6). Regulation 6(2) adds that gaining access includes collecting or monitoring information the terminal equipment emits automatically.

    The Data (Use and Access) Act 2025 replaced the earlier wording on 5 February 2026, so older summaries may quote text that has since changed.

    In practice, the ICO's guidance says the following (ICO, cookies and similar technologies):

    • Non-essential cookies must wait on your homepage until the user has consented.
    • Consent needs a positive action; carrying on browsing the site does not count.
    • The same rules cover similar technologies beyond cookies, including apps.
    • Anonymous data is not exempt, because the rules apply to all cookies.
    • The exemptions are narrow. Something helpful or convenient that is not essential still needs consent.

    A tracker whose job is to name your visitors for sales is hard to describe as essential to the service the visitor asked for.

    Person-level data adds a second layer: you need a lawful basis for processing it under UK GDPR. The ICO updated its legitimate interests guidance on 23 March 2026 for the Data (Use and Access) Act. See the guidance itself (ICO, legitimate interests). It sets out a three-part test and a balancing test, and it treats the newer "recognised legitimate interest" basis separately. That guidance is the starting point.

    Passing the balancing test is never automatic, so write the assessment down. A worked legitimate interest assessment for cold outreach is a good template.

    EU. Under the ePrivacy Directive's Article 5(3), storing data on a user's device, or reading what is already there, is allowed only if the user has consented after clear and comprehensive information. The exception is what is strictly necessary to provide a service the user explicitly asked for (EUR-Lex, Directive 2002/58/EC). Person-level data then needs a lawful basis for the processing as well.

    On how far Article 5(3) reaches technically, the European Data Protection Board published Guidelines 2/2023 on its technical scope, final version dated 16 October 2024 (EDPB). Give that document to whoever signs off your tracking setup.

    Run this checklist on any tool before it goes live:

    1. Does the script fire only after the visitor gives a positive consent action on your banner?
    2. Is the tool named, with its purpose, in your cookie notice?
    3. For person-level data, is a lawful basis chosen and the assessment written down?
    4. Do you know where the vendor stores the data, and under which terms?
    5. Can you find and delete one person's records when they ask?

    If any answer is "I am not sure", fix that before you compare prices.

    What do Warmly alternatives cost right now?

    Below is what each vendor's own pricing page shows, in the currency it publishes at the time of writing. Warmly sits at the top so you can see what you are replacing.

    ToolPlanPrice as publishedBillingWhat you get at this tier
    WarmlyAI Web-Deanonymization$10,000 yearly minimum; $4,875 per quarterYearly or per quarterVisitor identification on 10K or more credits monthly
    WarmlyInbound Chat$20,000 yearly minimum; $6,500 per quarterYearly or per quarterIdentification plus website chat
    WarmlyAI Inbound Autopilot$30,000 yearly minimum; $9,750 per quarterYearly or per quarterChat plus AI inbound agents
    LeadfeederLiteEUR 0FreeShows the last 100 companies it identified each month; history kept for 7 days
    LeadfeederDiscoverFrom EUR 79 a month (EUR 113 paid monthly)Annual or monthlyCompany reveal
    LeadfeederDiscover, 501 to 1,000 companiesEUR 309 a month (EUR 441 paid monthly)Annual or monthlySame plan, more companies identified
    LeadfeederActivateFrom EUR 369 a month (EUR 527 paid monthly), at 1,000 companies and 200 creditsAnnual or monthlyVerified emails and phones
    LeadfeederScaleFrom EUR 599 a monthBilled annuallyDedicated customer success manager
    RB2BFree$0Free150 company-level resolutions a month, no person-level ID
    RB2BStarter$79 a monthMonthly300 resolutions a month, person-level ID in the US only
    RB2BProFrom $149 a monthMonthlyFrom 600 resolutions a month, person-level ID in the US only
    Factors.aiLite$199 a month after trialMonthly, cancel anytimeNames up to 1,500 companies monthly
    Factors.aiBasic$6,000 a yearAnnualUp to 3,000 identified companies a month
    BreakoutSignalsFrom $500 a monthNot statedCompany ID and Person ID are listed among the features
    BreakoutGrowthFrom $2,000 a monthNot statedFinal price estimated with a slider on the page
    SalesmotionIndividual$85 a monthMonthly, cancel anytimeOne seller; team and enterprise plans are custom
    6senseAll plansNo list price published; quotes onlyQuoteUnits priced by volume band

    Warmly's pricing page shows no free plan or trial; its toggle reads "Pay quarterly to try, switch to annual to save."

    If you negotiated your Warmly contract, put your own figure next to these rows. That is the number you are actually replacing.

    For a team that only uses identification, the gap is plain. A full year of Leadfeeder Discover at its 1,000-company tier costs EUR 3,708 (12 x EUR 309 on annual billing), under half of Warmly's $10,000 minimum, unless a euro costs more than about $1.34.

    Not every row is cheaper than Warmly: Breakout Growth at $2,000 a month is $24,000 a year, above Warmly's entry plan. RB2B is the low-cost route if you sell into the US and want named people. For buyers elsewhere it gives you company-level data only.

    Three things push the real cost above the headline price:

    • Volume tiers. Leadfeeder prices Discover by the number of companies identified, so a traffic spike can push you up a tier.
    • Credits. On Leadfeeder, verified contact data on Activate draws on plan credits. Budget credits for the accounts that pass your ICP check, and none for the rest.
    • Long billing terms. Warmly bills by the quarter or the year, and Leadfeeder Scale cannot be paid monthly. Commit only after a free tier or a monthly plan has proved the funnel.

    How do you switch from Warmly without losing data?

    The data that matters lives in your CRM, so most of the switch is about getting it there before the old contract ends.

    1. Export and tag. Pull every identified account, contact and note you plan to keep, import it into your CRM well before your notice date, and mark each record with its source and date.
    2. Swap the scripts on the same day. Put the new one under your consent banner and in your cookie notice, and remove the old one. Two trackers on one page means two consent questions and two data processors.
    3. Rebuild only the alerts you used. Copy the filters that sent real accounts to real people, and leave the rest behind.
    4. Compare over a full month. Check the new tool's named companies against your tagged import before judging it.

    Can visitor identification replace outbound?

    No. A visitor identification tool only sees companies that already found you. Most of your addressable market has never visited your site, so it never shows up in any tool, however well that tool resolves traffic.

    Outbound is how you reach the companies that would buy but have not heard of you yet. One tech company we worked with started at zero qualified calls. Within 90 days it was booking 40+ per month.

    The named accounts you do get are raw material for a list. Each still needs three things:

    • The right person. A company name points to an organization. Look at who signed off on your past deals and find that title at the visiting company.
    • A verified address. Check every address before you send, so a fresh feed of names does not wreck your bounce rate.
    • A reason to reply. The visit tells you they looked. Your message has to give them something worth answering. Start on LinkedIn and let the email follow, over 5-6 touch points. We usually see the answer arrive on the third follow-up. Leave real time between sends.

    If outbound is failing, I look at the list before I read a single email, because no message can rescue a poor list or a shaky sending setup. Adding visitor names to a sloppy list leaves the list just as sloppy. The list matters more than the email, so run the checks on every file.

    Which platform you pay for means nothing to the prospect. Nobody buys from an email. They check your LinkedIn profile and your site first, so fix what they see before you add more names to the list. We have watched this with one message. At one company it got 2% replies. At another it got 7.5%. Only the foundations were different.

    Each month, add the identified accounts that fit your ICP to your outbound list, and use them as a hint about which segments to go after next. If you sell into the US and mainly want named people, the cheaper options to compare are RB2B alternatives.

    Wondering if visitor identification is worth it for your traffic? Book a call and tell me your monthly visits, and I will say whether I would buy it or skip it.

    Questions founders ask before buying a tool

    What happens to my visitor data if I cancel the tool?

    Check the vendor's terms for a retention period after cancellation, and get it in writing before you sign. Ask how long records stay after the contract ends, in which format you can export them, and how to request deletion. Then export the accounts you want into your CRM before the last paid day.

    Does visitor identification work on pages behind a login?

    Logged-in users are already known to you through your own account system, so a third-party tool adds little there. The legal side does not change: the ICO's guidance on similar technologies also covers apps, so a tracking script inside a customer portal raises the same consent questions as one on your homepage.

    How long should I trial a visitor identification tool before deciding?

    Run it across at least one full sales month, so the numbers include a normal mix of campaigns, holidays and quiet weeks. On Leadfeeder's free Lite plan the history window is short (see the table), so review the named companies weekly instead of waiting for the end of the month.

    Do Leadfeeder credits expire if I do not use them?

    Standard credits that come with a plan do not roll over, so a quiet month means paying for contact data you never pulled. Extra credit blocks, sold in sizes from 100 to 5,000, stay valid for two years. If your usage is uneven, a smaller plan plus an occasional extra block can cost less than a bigger tier.

    Whichever tool you pick, run the arithmetic on your own traffic before you sign. If it gives you three conversations a month, ask whether those three can carry a $10,000 contract. And keep outbound running for the companies that never visit your site.

    Want to see what we would build for your company?

    I am Artem Smirnov. I help established B2B companies build and run the go-to-market system behind their pipeline, from outbound to AI search visibility. Book a call and we will see what fits yours.

    Artem Smirnov
    Artem Smirnov

    I help established B2B companies build and run their go-to-market systems. 9 years in outbound, 10,000+ campaigns.