Which lemlist alternative fits your reason for leaving?
Swapping the logo rarely fixes the problem. The right lemlist alternative depends on why you want out.
- The per-seat price hurts. That bites on lemlist's Multichannel plan, not its Email plan. Smartlead and Saleshandy charge flat plans with no fee per inbox.
- You run dozens of mailboxes. Instantly and Smartlead both include unlimited email accounts.
- You want LinkedIn steps and lemlist's $109 per-user Multichannel seat feels steep. Look at Expandi, or Woodpecker's Multichannel plan.
- Your emails land in spam. Fix the sending setup first. A new dashboard still sends from the same domains, the same DNS records and the same list.
| Your reason to leave | Pick | Why it fixes that reason | When switching will not help |
|---|---|---|---|
| Paying per seat when you mostly send email | Smartlead or Saleshandy | Flat plans, mailboxes not billed one by one | If you sit on lemlist's Multichannel plan only for email, its Email plan already gives unlimited users and senders |
| Running 30, 50 or more mailboxes | Instantly or Smartlead | Unlimited email accounts on the plan | Mailboxes and domains still cost money outside every tool |
| Campaigns pausing at the monthly email cap | Smartlead or Instantly on a higher volume tier | Bigger send allowances per plan | lemlist sells bigger Email tiers too, so compare tier against tier |
| LinkedIn and email in one sequence without a per-user seat | Expandi, or Woodpecker Multichannel | LinkedIn and email steps in one campaign; compare its price per LinkedIn profile with lemlist's $109 seat | One LinkedIn profile can only reach so many people a month, whichever tool drives it |
| Emails going to spam | Fix the setup, then decide on the tool | Authentication, warm-up and list quality decide placement | Switching moves broken records, a dirty list and a rushed ramp to a new login |
If you are still mapping the full set of tools cold email needs, job by job, sort that out before you replace any single piece; the cold email tool stack is the usual starting point.
When staying on lemlist is the right call
Two cases. You send email only and stay under the Email plan's monthly allowance, which already gives you the flat model you would be switching to.
Or a small team uses LinkedIn steps every day. For two people, per-user pricing is a fair price for both channels in one inbox. In either case, moving buys you a migration and little else.
Why mailbox count decides the bill
One campaign we ran for a UAE tech startup used 50 email accounts and sent about 1,250 emails daily. At that scale the entry plan price barely matters.
What decides the bill is how each tool treats 50 mailboxes, and whether its send cap holds the monthly volume.
One note before the prices. My team runs cold email and LinkedIn for clients, and those clients pay their tool, domain and mailbox bills straight to the vendors.
What does lemlist actually cost right now?
At the time of writing, lemlist sells two self-serve plans plus a custom Enterprise plan (lemlist pricing).
| Plan | Price | What you get | The catch |
|---|---|---|---|
| $69 a month, or $55 a month billed yearly | 50,000 emails a month, unlimited users and email senders | No LinkedIn steps; campaigns pause at the cap | |
| Email, bigger tiers | 200,000 emails for $159 a month, up to 1,000,000 for $659 | Same plan, more volume | Price climbs with volume |
| Multichannel Expert | $109 per user a month, or $87 billed yearly | LinkedIn and SMS automation, unlimited emails and messages | Each user can have 5 sending emails at most, and one account per real person |
| Data add-on | $20 a month, or $16 billed yearly | 2,000 credits, enough for 400 emails or 100 phone numbers | Sold separately from both plans |
The tier prices, the 5-sender limit and the account rule come from lemlist's own help center guide to choosing a plan. The same guide lists 10% off for quarterly billing and 20% off for yearly.
Three details matter more than the headline price.
The cap pauses your campaigns. When an Email plan account hits its monthly allowance, lemlist pauses active campaigns automatically. If a sequence is mid-flight, follow-ups stop until the month resets or you upgrade.
Seats are people. The rule is one account per person. You cannot buy extra Multichannel seats just to hold more mailboxes.
Changing plans is a migration. The help center says you cannot switch from Email to Multichannel on the same team. That means a new team and a manual move of your data. If you think you will want LinkedIn steps in six months, that friction exists inside lemlist too.
On the plus side, every plan includes lemwarm, lemlist's built-in warm-up tool. Data credits carry over while the subscription stays active.
How do the alternatives compare on price and mailboxes?
Prices here are at the time of writing, taken from each vendor's pricing page: Instantly, Smartlead, Saleshandy, Mailshake, Woodpecker and Expandi.
| Tool | Entry plan and price | Mailbox policy | Sending allowance at entry | LinkedIn steps |
|---|---|---|---|---|
| Instantly | Growth, $47 a month; bundles with lead data from $94 a month | No cap on email accounts or warm-up | 5,000 emails a month | None listed on the pricing page |
| Smartlead | Base, $39 a month or $32 billed yearly | No limit on email accounts, no extra charge | 6,000 sends, 2,000 contacts | None listed |
| Saleshandy | Starter, $41 a month or $34 billed yearly | No per-inbox fees; sender rotation covers up to 10 accounts on Starter | 6,000 emails, single seat | Not listed; sequences cover email, calls, WhatsApp and tasks |
| Mailshake | Starter, $29 a month or $25 billed yearly | One email address per account | Up to 1,500 sends | None listed |
| Woodpecker | Email, Multichannel and LinkedIn plans, priced by monthly emails-sent tier from 5,000 to 1,000,000 | Unlimited email accounts and team members on Email and Multichannel | Set by the tier you pick | Multichannel runs email and LinkedIn in one campaign, 1 LinkedIn account included |
| Expandi | Business, $99 a month or $79 billed yearly | Built around LinkedIn accounts | Not an email volume tool | LinkedIn invites, messages and email follow-ups in one sequence |
lemlist vs Instantly. Both let you connect as many mailboxes as you like at the entry level. Instantly's Growth plan costs less than lemlist's Email plan, but it includes 5,000 emails a month against lemlist's 50,000, so entry prices are not a fair comparison. Compare at your real volume, as the cost table below does.
Move if you want lead data and sending on one bundled bill. Stay if LinkedIn steps live inside your sequences, because Instantly's pricing page lists no LinkedIn automation. If Instantly is already your tool and you doubt it too, the Instantly alternative guide covers that question.
lemlist vs Smartlead. Smartlead Base is a low-cost way to start, but 6,000 sends run out within days at any real volume. The useful comparison sits one tier up, where the volume lives (next section). Smartlead also sells domains and mailboxes on the same bill, which helps if you are building infrastructure from zero. It shows no LinkedIn steps, so this is an email-only move.
What hidden costs change the real monthly bill?
Now take an example setup: 50 mailboxes sending 30,000 emails a month. Here is what each tool charges to hold that volume, with sources as cited above.
| Tool | Plan that holds 30,000 emails a month with 50 mailboxes | Tool fee |
|---|---|---|
| lemlist Email | The base Email tier, which stays under its cap | $69 a month, or $55 billed yearly |
| lemlist Multichannel | 10 seats at 5 senders each, and 10 real people under the one-person rule | $1,090 a month, or $870 billed yearly |
| Instantly | Hypergrowth, 125,000 emails a month | $107 a month |
| Smartlead | Pro, 90,000 sends | $94 a month, or $78 billed yearly |
| Saleshandy | Pro, 100,000 emails and up to 10 seats | $99 a month, or $76 billed yearly |
| Mailshake | Agency, the only plan listing unlimited email addresses | No published price; sales quote only |
At this volume, lemlist's Email plan carries the lowest published tool fee in the table. lemlist only gets expensive when per-user Multichannel seats are bought as containers for mailboxes.
Mailboxes and domains cost money on every tool. I tell founders to plan 20 to 40 mailboxes spread over 10 to 20 domains, and more for bigger companies. Fifty mailboxes is past that range, so the figures below assume 20 domains. Priced through the vendors' own mailbox offers:
- Smartlead SmartSenders: $13 per domain a year, so 20 domains cost $260 a year. Fresh mailboxes cost $4.5 each a month, so 50 cost $225 a month. Pre-warmed mailboxes cost $9 each.
- Mailshake Ready to Use Mailboxes: $12 a month each, so 50 would cost $600 a month.
On the Smartlead setup, the mailboxes alone cost more than twice the Pro plan.
Data is its own line. lemlist sells data as an add-on. Instantly puts its 450M+ lead database in bundles above the outreach plans. Saleshandy includes 1,500 lead finder credits on Starter, with one credit per verified email. Mailshake's Data Finder costs $19 a month extra. Budget for data separately, whichever tool you pick.
Add these lines up before you compare entry prices. Then add your own hours for setup, warm-up and replies, because they are a cost too.
Will a new tool fix lemlist deliverability problems?
Usually not. Inbox placement depends on your domains, your records, your list and your ramp. All of those come with you to the new tool.
Gmail's own help page on sender reputation says messages from high-reputation senders are more likely to reach the inbox instead of spam. That reputation belongs to the domains and IPs that send. Not to the software.
Google's sender rules make a good pass or fail test for any tool and any setup:
| Gmail rule | Pass | Fail |
|---|---|---|
| Authentication for all senders | SPF or DKIM on every sending domain (Google sender guidelines) | No records, or records on the wrong domain |
| Bulk senders, near 5,000 messages a day to personal Gmail | All three of SPF, DKIM and DMARC, with a DMARC policy of p=none at minimum | DMARC missing, or the From domain not aligned with SPF or DKIM |
| Spam rate in Postmaster Tools | Below 0.10% | Reaching 0.30% or higher |
| Unsubscribe for bulk marketing mail | One-click unsubscribe through List-Unsubscribe headers (Gmail Help) | A link to a landing page only |
Two more facts from Google's bulk sender FAQ. Once a domain counts as a bulk sender, that status never expires. Enforcement also ramped up from November 2025, including temporary and permanent rejections.
These rules are written for personal Gmail accounts, and Google says they do not apply to mail sent to Google Workspace accounts. Treat them as the minimum.
My own rules sit on top of Google's. I put SPF, DKIM and DMARC (the DNS records that prove you may send for a domain) on every domain before it sends a single campaign email, whatever the volume. A setup sending 1,250 emails a day sits below Google's bulk line and still gets all three.
New accounts warm up for a minimum of 10 to 14 days, and only then contact a prospect. How long a new domain takes to warm up depends on volume and reputation.
Bounces stay under 0.5%. Volume goes up only after warm-up, never during it. And no copy, however good, rescues a weak sender or a bad list.
The hardest part is the wait. You spend a month paying for domains and warming mailboxes with nothing visible to show for it. Founders cut that month short and then blame the copy or the tool.
For clients, my team gives every campaign dedicated sending IPs, with separate IPs even across different domains, so a single client can run on 10 to 20 of them. It matters because Google notes that every sender on a shared IP affects that IP's reputation. Before you switch, ask the new vendor whose traffic you will be sharing.
Which alternative keeps LinkedIn and email in one sequence?
You have three routes:
- lemlist Multichannel Expert, priced per user.
- Expandi, which puts LinkedIn invites, messages and email follow-ups into a single sequence.
- Woodpecker's Multichannel plan, which runs email and LinkedIn in one campaign with 1 LinkedIn account included.
The order of steps matters more than the logo. I never let the email open the conversation: my sequences start on LinkedIn, and the email arrives once my name already looks familiar.
Plan 5 to 6 touches and spread them over both channels if you can. A pair of messages hardly ever opens a thread.
Both channels book meetings. Take a British IT consulting and software development company over one month, 17 April to 17 May 2023:
- Cold email: 2 sales, 13 booked sales calls and 41 positive replies.
- LinkedIn: 3 sales, 18 booked sales calls and 62 positive replies.
An email-only tool cannot run the LinkedIn half of that split.
So before you pay, rebuild your real sequence in the new tool: LinkedIn step first, warm email second, the full number of touches. If the builder cannot express that order, drop it from your shortlist.
How do you switch from lemlist without losing a month?
Run these steps in order:
- Export everything from lemlist. That means contacts, campaign status, unsubscribes and bounced addresses, as separate files.
- Import the suppression list first. Unsubscribes and bounces go into the new tool before any contact list, so nobody who opted out gets a fresh sequence.
- Check authentication on every domain you connect. Use the Gmail table above as the test.
- Warm up any new mailboxes for the full period from the deliverability section before they send to prospects.
- Let live lemlist sequences finish. Do not re-import people who are mid-sequence, or they get two first emails from you.
- Put an inbox manager on replies in both tools until lemlist goes quiet, so nothing gets missed.
- Cancel lemlist only after replies stop coming in.
Step 2 is not optional if you email US recipients. The FTC's CAN-SPAM guidance treats business-to-business email like any other commercial email, with no exemption. Honor each opt-out within 10 business days, and keep the unsubscribe method working for at least 30 days after every send.
Each violating email can cost up to $53,088 under this US law.
A tool change is exactly when an old unsubscribe gets lost. This is not legal advice.
Should you buy a tool at all, or hand outbound to an agency?
A company I know saw a 2% reply rate. Another got 7.5% with the same message. Prospects judge the sender, not the tool that sent it. They see your offer, your profile and your message, and a new campaign in a popular platform usually brings zero new clients when those are weak.
The split I use: automate the machinery your buyer never sees, like list building, verification and send scheduling. Keep a person on everything they do see, like the offer, the messages and the replies.
That gives a simple decision rule. Buy the tool yourself if someone on your team will own the offer, the list, the domains and the replies every week. If nobody will, a cheaper tool only lets you fail for less money.
Hiring an agency does not remove the tool question. It adds a retainer on top. Ours starts from USD 3,000 (about EUR 2,500) a month, tools not included. What agencies charge in general is worth reading first.
With my team, clients pay for tools, domains, mailboxes and data directly, so those accounts stay theirs. Whoever you hire, settle who owns the domains an agency buys before the first one is registered. And whatever you buy, name the one reason you are leaving lemlist and test every option against that reason only.
If you are leaving lemlist and are not sure the next tool is the real fix, tell me your reason on a short call and I will give you my view.
Questions people ask before leaving lemlist
Is there a lemlist alternative with a free trial?
Yes. Woodpecker offers a trial that needs no payment method and ends at 14 days or 500 cold emails, whichever comes first. Expandi gives a 7-day trial with access to all features. Mailshake has no trial and collects payment up front. A trial short on sends cannot tell you much about inbox placement.
Does my mailbox reputation carry over when I change tools?
If you keep the same domains and mailboxes, their sending history stays with them. Google defines reputation as a quality rating of the domains and IP addresses used to send email, set by how they send. The tool is not part of that rating.
What stays behind is the old tool's warm-up network. Keep warm-up running on the new tool during the move. If the new tool sends from shared IPs, the other senders on those IPs affect you.
Can I run lemlist and the new tool on the same mailboxes for a while?
You can, but cap each mailbox's daily sends across both tools combined. Neither tool sees what the other sends, so each one happily fills its own daily limit. That doubles the volume on a warmed mailbox overnight, which is exactly the spike warm-up exists to prevent. Splitting mailboxes between the tools is safer.
Is lemlist worth it for a solo founder sending low volume?
Only if you will use LinkedIn steps weekly, which means the $109 per user Multichannel plan. For email alone, a couple of hundred emails a week fit Mailshake's $29 Starter plan. At this size the bigger risk is the offer: if small numbers bring no replies, larger numbers will not either.
Do lemlist alternatives work for sending into Germany and the EU?
The tool does not change the law of the market you send into. My team mostly targets the USA, the UK and Europe, mostly in English. Germany is outside our specialty. There, and in Austria and the Czech Republic, prospects get no cold email from us unless a compliant basis exists; we reach them on LinkedIn. This is not legal advice.
