Account based prospecting (ABP) is a sales motion. Your team picks a short list of named companies and researches each one. Then it reaches 2 or 3 of the right people inside every account by email and LinkedIn, until one of those conversations becomes a meeting. Marketing does not have to be involved, and you need no ad budget.
The working version has five steps:
- Mine your past clients to pick the accounts.
- Map 2 to 3 real buyers inside each one.
- Keep one account plan card per company.
- Give every mapped role 6 touches across LinkedIn and email.
- Measure results per account, since a count of emailed contacts tells you very little.
Where does ABP end and ABM begin?
ABM, account-based marketing, is the wider program that marketing runs at target accounts: ads, content, events and a budget to match. ABP is the part sales can run alone with research, email and LinkedIn. Account-based selling, which target account selling describes, starts once a meeting exists and carries the deal to a signature. Marketing also runs account-based marketing on LinkedIn with ads and content.
Why several people per account? Forrester's Buyers' Journey Survey 2024 puts the average buying decision at 13 people. They sit in five roles: user, ratifier, influencer, champion and decision-maker (Forrester). Its 2024 buying study adds that 89% of purchases cross at least two departments (Forrester).
You do not need to write to 13 people. One contact per account is a single point of failure, though, so plan 2 to 3 roles and let them bring in the rest. Foundry's guide to multithreading buyer journeys says that reaching several people on the same team can raise both response and meeting rates.
Why reach every account on both email and LinkedIn?
One month of our own data answers this. Between 17 April and 17 May 2023 we ran both channels together for a British client whose business is IT consulting and software development.
| Channel | Positive replies | Sales calls | Sales |
|---|---|---|---|
| Cold email | 41 | 13 | 2 |
| LinkedIn outreach | 62 | 18 | 3 |
Email and LinkedIn closed 5 deals between them. The client's total for that month was 6 contracts and GBP 928,800. The sales calls in the table were meetings booked through email and LinkedIn.
LinkedIn brought more replies, yet each channel turned roughly a third of its positive replies into calls, and each closed deals. So every role on the card below hears from you on both.
How do you choose target accounts, starting with account mining?
Account mining means building the target list from clients you already won. Every list I build starts there: current and past clients first, then the companies that resemble them. One campaign that began with this exact step booked 78 sales calls in its first 30 days.
- List your wins from the last two years.
- For each one, note the industry, headcount band, region and the trigger that made them buy, such as a new contract, a new site or a vendor who let them down.
- Keep the traits that repeat across most wins. That is your fit profile.
- Find companies that match it, filtering by industry, size and region.
- Rank them by likely deal value and by how closely your best proof matches them.
Sources and address checks are what separate a lead list worth sending to from one that bounces.
Give every account exactly one owner. My team splits territory per account and per sender, so two people never write to the same buyers.
Intent data only pays off in a big market. If only about 10 of your 2,000 target companies show a buying signal, those signals cannot fill a pipeline. In that case I skip intent data and spend the effort on an offer every one of the 2,000 would want to hear.
Who should you contact inside each account, and what goes on the account plan card?
Take the titles from your own history. Before building a list, I look at the deals a client already closed and find out who signed and who argued for the purchase. The search then runs on those exact titles, and a bare Manager, Assistant or Associate title with no function attached comes out entirely.
Below is the card, with one proof line from a similar client so a real result can sit inside the message. The example column is fictional: a supplier of temporary site lighting approaching a contractor.
| Field | What to write | Illustrative example (fictional) |
|---|---|---|
| Account | Company name and type | Northgate Civils, regional civil engineering contractor |
| Why this account | Which past win it resembles | Same size and region as two contractors already buying |
| Why now | A visible trigger | Won a highways framework this quarter |
| Role 1 | Exact title and what they decide | Head of Procurement: approved suppliers |
| Role 2 | Exact title and what they decide | Contracts Manager: who gets each package |
| Role 3 | Exact title and what they decide | Health and Safety Manager: site lighting standards |
| Proof line | One result from a similar client | Lighting package for a similar contractor's bypass scheme, on site in 3 weeks |
| Owner | One person | Rep A |
| Channel per role | Where each role is reached first | LinkedIn first for all three, email after |
| Touch log | Date, touch, role, outcome | 3 Nov, touch 1, Head of Procurement, request sent |
| Next action | The single next step | Touch 2 after acceptance |
What should the 6-touch email and LinkedIn schedule look like?
In our campaigns, LinkedIn goes before email, because an email lands warmer once the person has already seen you there. One or two messages are never enough, so every role on the card gets this 6-touch run:
| Touch | Channel | Purpose |
|---|---|---|
| 1 | Profile visit and connection request with a one-line reason | |
| 2 | Message after acceptance, asking for a short conversation | |
| 3 | First email, referring back to the LinkedIn contact | |
| 4 | Follow-up carrying the proof line from the card | |
| 5 | Short message built on the "why now" trigger | |
| 6 | One last ask, then this role is parked |
Start with Role 1. Begin Role 2 when Role 1 reaches touch 4, and Role 3 when Role 2 does, so the account warms up one person at a time. The account itself is parked only after Role 3's touch 6.
Leave real time between touches. In our campaigns, with a proper gap before it, the third follow-up is usually the one that works, which is touch 4 here, so do not stop at three.
Every touch asks for a short conversation, never the sale; a pitch in the opening message is the fastest route to being ignored. If a connection request is never accepted, skip touch 2 and send touch 3 by email after a real gap.
Here is touch 3 to Role 1 on the fictional card above (Sarah is the Head of Procurement):
Subject: Lighting on the highways framework
Hi Sarah, we connected on LinkedIn last week. Congratulations on the highways framework. Night work on schemes like that usually means temporary lighting packages get placed early. We supplied one for a contractor your size on a bypass job. Would 15 minutes before your first packages go out be useful?
The copy behind each step works best when you treat LinkedIn and email as one sequence.
Score it per account: each week, count accounts with a reply from any role, accounts with a meeting booked and the pipeline value on each. Two roles replying with no booking means the fit is there and the ask or proof line needs work.
When should you use ABP, broad outbound or ABM with ads?
| Motion | List size | Who runs it | Budget type | Needs to work | Main risk |
|---|---|---|---|---|---|
| Account based prospecting | A few hundred named accounts | Sales | Team time and data | High deal value, 2 to 3 mapped roles per account | Too few accounts to beat bad timing |
| Broad outbound | Thousands of companies | Sales or an outbound team | Sending setup and data | Segmented tracks and steady volume | Generic copy and damaged domains |
| ABM with ads | Named accounts | Marketing plus sales | Ad and content budget | A marketing team and patience | Spending heavily before any signal |
Deal value and market size decide it. Hand research per account makes sense at the deal sizes my clients usually sell: from USD 10,000 upward, and often six or seven figures.
If your whole market is a few hundred companies, there is no broad list to fall back on: work all of them as named accounts and judge the result over several months, since one month on a short list is a timing bet.
If it runs to thousands, go broad with segmented tracks and keep the full card for your top tier. The trade-off is the one behind choosing named accounts or a broad list.
Where does account based prospecting break down?
Small lists break on timing. In our campaigns a typical reply rate is about 1%, and it falls to around 0.5% once we send thousands of emails a day. Very narrow, heavily personalized campaigns can reach 15% to 17%, with roughly 75% of repliers interested, and 10% to 50% of replies usually become meetings. Read them as ranges and not as guarantees.
On a list of 80 accounts with 3 roles each, the usual 1% rate gives a handful of replies and at best one meeting in a month. Even the personalized top end gives only about 36 to 41 replies, still a small sample to judge a month on.
- 80 accounts -> 240 contacts in one month
- At the personalized top end -> 36 to 41 replies -> roughly 4 to 20 meetings
- At the usual rate -> 2 or 3 replies -> about 1 meeting at best that month
With 50 to 100 perfect-fit accounts a month, everything rides on whether the right buyers happen to have time this month. Busy. Not ready. Not interested. That is a coin flip, and I would not plan revenue on it.
Rewriting the emails will not change that math. So my rule: if your market is big enough, run ABP as the top tier: named accounts get the full card and all 6 touches per role, while a broader track keeps volume up. If you would rather have a senior team run both tracks, see our B2B lead generation approach.
Is cold account-based outreach legal in the UK and EU?
The answer depends on the country and on who you write to: UK corporate addresses are the loosest case, while Germany, Austria and the Czech Republic need a compliant basis first. Treat this as general information and not as legal advice.
UK. According to the ICO, the PECR email rule does not cover corporate subscribers. Every message still needs the real sender's name and a working opt-out address (ICO).
Individual subscribers also include sole traders and some kinds of partnership. Regulation 22 requires prior consent or the soft opt-in: your own similar products, offered to people whose details you got during a sale or negotiation (legislation.gov.uk).
UK GDPR still applies to a named work address. When someone objects to your marketing, you stop, with no exceptions, and finding data in public is not consent. The ICO says this guidance is under review, so check it before you send.
EU. Article 13 of the ePrivacy Directive applies its prior consent rule to subscribers who are natural persons. For other subscribers, member states must protect their legitimate interests, so the rules for company addresses differ by country. Senders may not disguise their identity, and each message needs a working address where the recipient can ask for the emails to stop (EUR-Lex).
My team mostly sends to the USA, the UK and Europe, and mainly to English-speaking markets. Cold email does not go to Germany, Austria or the Czech Republic without a compliant basis. We use LinkedIn in those markets, and Germany gets our own stricter rules.
Whatever the market, keep one exclusion list shared by every sender.
If you have a list of named accounts and are unsure who to contact in each, bring ten of them to a 30-minute call and I will help you pick the roles.
Questions founders ask about account based prospecting
How is account based prospecting different from key account management?
Key account management looks after clients you already have: renewals, expansion and the relationship. Account based prospecting opens companies that have never bought from you. Your key accounts feed the mining step, but keep the two separate in the CRM, so a renewal talk never collides with a cold sequence.
What should you do when nobody at an account replies after every role's six touches?
Park the account instead of sending a seventh email that week. First check that the titles really decide your purchase, the proof line matches that company and your emails reached the inbox at all. Then bring the account back next quarter with a fresh trigger and, where possible, a different role.
Do you need a CRM before you start?
Yes, though which one hardly matters. Three roles per account, each at a different touch, are hard to track in a spreadsheet. What matters is that no lead gets lost, because a lead you lose after this much research is expensive.
What should you do when one role replies while the others are still in sequence?
A reply from any one role puts the whole account in conversation. Pause the other roles' sequences at once and let the account's owner decide whether to resume them, because three people hearing different things from you in one week looks careless. Note which role answered, so the next similar account starts with that title.
