An account based marketing webinar is a session built for a defined list of named companies. You choose the accounts before the topic. You invite several specific people at each one, chosen by role. You plan the follow-up per account instead of per attendee.
The format comes from the list:
- Open: for a wide named list.
- 1:few: for a small group of accounts that share one problem.
- 1:1: for a single company.
Then you judge the session by accounts. How many sent someone? How many sent two or more roles? How many reached a sales conversation?
Most advice on ABM webinars centers on the event itself: the deck, the speaker, the platform. This guide covers the two parts on either side of it. The invite list comes before the session and the follow-up comes after it. Those two parts decide whether the right companies turn up and then move forward.
For the basics of the approach, see what is ABM; for the email copy itself, see ABM emails.
A note on where I stand. Most of what my team does is cold email and LinkedIn outreach; we never do pure cold calling. I write from the outreach side, and I have no webinar results of my own to show you. Every outside fact below is cited.
What is an account based marketing webinar, and what changes on the invite side?
A standard marketing webinar is built to collect sign-ups. You promote it to anyone who might care and count registrations. Then sales gets the leads one name at a time.
An ABM webinar runs the other way round:
- The company list exists before the title does.
- Each invite goes to a named person at a named account.
- The attendee report gets sorted by company before anyone writes a thank-you.
That changes three things on the invite side:
- Who you invite. Several people at each account, picked by the part they play in a purchase.
- How you invite. Personal messages on LinkedIn and email, written the way you would ask for a meeting. A newsletter blast does not count.
- What you count. Companies represented and moved forward, not seats filled.
A webinar invite list behaves like any outreach list. A sharper title or a nicer deck will not save an invite that goes to the wrong companies, just as good copy never saves a bad list.
When a campaign goes quiet, I check the list before I touch the message. At one company the reply rate was 2%. Another got 7.5% from the same message. So the wording is rarely the first suspect.
An average session with three people from each best-fit account beats a brilliant one with 40 strangers, because sales has real work the next morning.
Should your ABM webinar be open, 1:few or 1:1?
Build the account list first, then choose the format. There is no single right format, because every business sells into a different set of accounts.
| Format | Accounts on the list | How specific the content is | How invites go out | Who owns follow-up | Pick it when |
|---|---|---|---|---|---|
| Open (one-to-many) | A wide named list in one segment | One shared problem, in the segment's own words | Personal LinkedIn and email sequences to named people | Reps by territory, grouped by account | You need to find engaged accounts on a large list |
| 1:few | A small cluster, named one by one | One shared pain, with examples from their world | A sequence per person, written for their role | One account owner per company | Every account shares the problem now, and you can show it |
| 1:1 | One account | Built on their projects, numbers and people | Through your contact, plus direct invites to the rest | One named owner, often the founder | One deal is big enough for a tailored hour |
Two decision rules sit under the table:
- If you cannot name the pain that every account on the list shares, it is not a 1:few session yet. Split the list until you can, or run it open.
- If one account would need its own agenda to care, take it out of the 1:few. Give it a 1:1, or leave it out of this session.
The open format carries the biggest risk of drifting into a topic for everyone, which usually lands with nobody in particular. Even an open session should name one segment in its title.
A short list has its own limit. When every account on it fits perfectly but there are only a few of them, you are betting that none of those people are busy, unready or simply uninterested. That bet is a coin flip. Widen the list, or invite more roles per account, rather than expecting every account to show.
If the bigger choice is still open, between a short named list and a wider one, I compare account-based and volume outbound in a separate guide.
Who should be on the invite list from each target account?
Start from the customers you already have. Match on what made those deals work: industry, company size, region, the type of project they run, and the problem they bought for. That gives you the account list, and the people come next. I seed the list with clients who are paying and happy, then look for lookalike companies.
One contact per account is a weak bet. According to Forrester's 2026 business buying report, a typical purchase draws in 13 internal people plus 9 external influencers. Complex purchases involve more (Forrester).
A buying group, per Forrester, has five roles: user, ratifier, influencer, champion and decision-maker (Forrester). Each role needs a different reason to give you an hour:
| Role | Why they matter for the session | What the invite should promise |
|---|---|---|
| Champion | The person most likely to bring colleagues | A specific answer to a problem they own |
| Decision-maker | Signs off; joins only if the topic touches money or risk | Peer speakers, a short agenda, a clear outcome |
| Influencer | Shapes the shortlist, often from the technical side | Depth: the method, the trade-offs, the detail |
| User | Lives with the result every day | A practical method they can use the next morning |
| Ratifier | Procurement, finance or legal; may not join live | A short summary after the session, sent through the champion instead of an invite |
Invite by role first and seniority second. How deep to go at one company is its own question, covered in how many people to contact at one company.
Then get the titles right. Review past deals to see who signed off on each one. Then search with the job titles your niche really uses, never a bare "manager".
For a company selling to civil engineering contractors, that means titles like commercial director, chief estimator or head of health and safety. Drop generic titles like Assistant, Manager and Associate from the search.
Copy this checklist and run it before any invite goes out:
- Every account resembles a customer you already serve well.
- For each account, the role that decided past deals is mapped to a real title.
- Each account has at least two people invited, in different roles.
- You can say, in one line, why each person should attend.
- Generic titles are excluded, and every title on the list is one your niche really uses.
- Each account has one owner on your side, so two reps never invite the same person.
- Every address is verified before the first send (the rules are in the compliance section below).
How do you invite target accounts with LinkedIn and email?
Treat an invite as an outreach sequence with a date on it. I never let an email be the first touch. LinkedIn opens, and email follows. If you would rather hand the sequences to a team, see our LinkedIn outreach service.
One or two messages will not get a busy commercial director to block an hour. Plan for 5 or 6 touches as a minimum, spread over both channels.
| Touch | Channel | What it does | Keep out of it |
|---|---|---|---|
| 1 | LinkedIn connection request or profile visit | Puts your name in front of them before any ask | Any mention of the webinar |
| 2 | LinkedIn message, once connected | The invite: one problem, one reason this account should care, the date | Your product |
| 3 | Email, after the LinkedIn touch | The same invite, with the registration link and a three-line agenda | A long speaker bio |
| 4 | Follow-up 1, LinkedIn | A short nudge with one new detail, such as a speaker or a question the session will answer | "Just checking in" |
| 5 | Follow-up 2, email | An offer to add a colleague in another role | Pressure or a deadline trick |
| 6 | Follow-up 3, email or LinkedIn | Restates the single reason to come | A new topic |
Plan for a third follow-up. In our campaigns it is usually the one that works best, provided each follow-up gets real time before the next one goes out.
In any first message, I sell the conversation and leave the service out. A webinar invite is the same kind of ask. The hour costs you nothing to offer, but for them it is an hour taken from other work. Give one reason that only makes sense for their account.
Here is a made-up example of the touch-3 email, for a 1:few session aimed at UK civil contractors:
Subject: Retention on your framework bids
Hi Sarah, thanks for connecting last week. In three weeks we are running a 45-minute session for 6 UK civil contractors on one issue: how tier-two firms are handling cash retention on public frameworks. Two commercial directors who changed their approach this year will walk through what they did, and what it cost them. Your chief estimator is welcome too. The link and a three-line agenda are below. Shall I add you both?
It runs to roughly 70 words. It names the segment and one problem. It puts peers on stage instead of a vendor, invites a second role, and asks one question.
What rules apply to webinar invite emails?
An invite to someone who never asked for it is direct marketing email, and the usual rules apply. Everything below reflects the sources at the time of writing. This is general information, not legal advice.
| Where | Rule | What it means for your invite |
|---|---|---|
| UK, corporate subscribers | The ICO's B2B guidance says the consent rule in the Privacy and Electronic Communications Regulations (PECR) for email marketing does not extend to corporate subscribers. You still must say who you are and give recipients a working way to opt out (ICO) | Identify the sender clearly in every invite and include a working opt-out |
| UK, sole traders and some partnerships | The ICO treats these as individual subscribers. PECR regulation 22 requires prior consent or the soft opt-in. The soft opt-in means details collected during a sale or negotiation, similar products only, and a free opt-out at collection and in every later message (legislation.gov.uk) | Flag these contacts on the list; without consent or a soft opt-in, invite them on LinkedIn instead |
| UK, named people | The same ICO guidance says UK GDPR applies when the email address identifies an individual person (ICO) | Know your lawful basis, and tell people you hold their details |
| Gmail recipients | Google's sender rules apply SPF, DKIM and DMARC to anyone sending over 5,000 messages a day to Gmail addresses, and bulk marketing mail needs one-click unsubscribe. For all senders, Google's ceiling is a 0.30% spam rate, with 0.10% as the recommended target (Google) | Use the bulk-sender standard on every sequence, whatever your volume |
The ICO says its B2B guidance is under review, so it may change after the Data (Use and Access) Act. Read the current page before you rely on it.
Most of the outreach we run goes to the USA, the UK and Europe, so US rules matter too. Business-to-business email gets no carve-out from the FTC's reading of CAN-SPAM, so each message needs a valid physical postal address and every opt-out must be honored within 10 business days (FTC). For Germany, Austria and the Czech Republic, my team contacts people on LinkedIn and skips cold email unless a compliant basis exists.
The sending side matters as much as the wording. Keep cold sequences off the domain that sends your invoices. Separate domains get SPF, DKIM and DMARC, plus a proper warm-up, before anything goes out.
For EU markets, check the national rules with a local lawyer before you send. On my side, every address is verified before it enters a sequence, and I keep bounces under 0.5%.
How do you follow up after the webinar, account by account?
Before anyone sends a thank-you, sort the attendee export by company. A flat list of 60 names hides the question sales needs answered: which accounts moved.
Then send every invited account down one of three paths:
| Path | Who is in it | Next touch | Owner |
|---|---|---|---|
| Accounts with attendees | At least one person joined live | A personal note to each attendee, tied to their role and any question they asked; a call request only after they reply | Account owner |
| Registered, did not attend | Signed up, missed the session | The recording, cut to the part that fits their problem, plus one question | Account owner |
| Invited, never registered | Nobody from the account signed up | No recording blast; the outreach sequence continues, using one point from the session as the reason to talk | Account owner |
When you write to someone whose colleague attended, talk about the session and keep attendee names out of it.
From every path, I want a conversation first, because the call grows out of the conversation and the client grows out of the call. Each account, with every person and the path they are on, sits in one CRM record. I do not mind which CRM, as long as no reply gets lost in someone's inbox.
Now one account from that 1:few session, a tier-two civil contractor (again an invented example, not a client).
- Commercial director (decision-maker), attended. She asked about retention on framework jobs. The next day she gets a two-line answer to her question. If she replies, the account owner asks for 20 minutes.
- Chief estimator (user), attended. He gets the pricing method shown in the session. There is no call request yet, because he is not the one who would book it.
- Bid manager (champion), registered but missed it. He gets the recording cut to the retention section, with one line pointing to the part that matters most for his team. His LinkedIn sequence then continues.
- Procurement lead (ratifier), never invited. He gets nothing directly. A one-page summary goes to the champion to pass on when the time is right.
In the account record, this company counts as two roles attending, with the champion still open. One account owner reads the whole picture in one place.
How do you measure an ABM webinar by account instead of by attendee?
Attendee totals mislead. 40 people from 3 accounts looks better on a slide than 12 people from 9 accounts, but the second result gives sales nine companies to work instead of three.
| Metric | Plain definition | What it tells you |
|---|---|---|
| Accounts invited | Target accounts where at least one person received an invite | The real size of the play |
| Accounts with 1+ registrant | Accounts where at least one person signed up | Whether the topic matched the list |
| Accounts with 2+ roles attending | Accounts where people in two or more buying roles joined live | Whether the invite reached more than one person in the buying group |
| Accounts that reached a sales conversation | Accounts where someone replied to follow-up and spoke with your team | Whether the follow-up worked |
| Accounts in pipeline | Accounts with an open opportunity in the CRM that the session touched | What the hour was worth |
Make conversations the headline target. I tell teams to aim for 50+ conversations started this month, not 10 booked calls. For a webinar, that means the number to report upward is accounts that reached a sales conversation.
When a team celebrates the few accounts that signed, I look at the larger group that went quiet. Pull the accounts that registered and then went silent. Ask the account owners what those accounts needed that the hour did not give them.
Before you plan the next session, open the last one's registration export and add a company column. If you cannot fill it in for every row, start there.
Planning a webinar for a named account list and unsure who to invite? Book a call and bring the accounts, and I will go through the invite list with you.
Questions people ask about ABM webinars
Are webinars still effective for B2B in 2026?
I have not seen a 2026 webinar statistic I would trust. The nearest evidence is about how buyers want to buy. Gartner surveyed 646 B2B buyers in August and September 2025. Two in three (67%) preferred to buy without a sales rep (Gartner). A peer-led session with no pitch fits that preference. A product demo dressed up as a webinar does not.
What makes a good ABM webinar topic?
Test it on two existing customers before you book a speaker. If they would forward the title to a colleague, keep it. A good topic gives people something usable even if they never buy, such as a method, a template or a peer's real numbers. Product tours belong in a sales call.
Should you gate an ABM webinar recording?
For named invitees, no. You already know who they are, so send each person a direct link and track views by account. A registration form only adds a step for the people you most want watching. Gating makes sense on a public page for an open session, where you want to learn which unknown companies show interest.
What day and time should you run an ABM webinar?
Work from the time zones on your account list. If it covers both the UK and the US East Coast, an afternoon slot in the UK is a morning slot in New York. Avoid month-end and quarter-end if finance or procurement roles are invited. For a 1:few or 1:1 session, ask the champion which slot their team can make.
Can you run an ABM webinar without ABM software?
Yes. You need four things: a CRM with an account field, a webinar tool that exports registrants, LinkedIn, and a sequencing tool for email. A shared sheet is enough for a 1:1 or 1:few session. Dedicated ABM platforms start to pay off when an open session runs to a large named list and matching people to accounts by hand gets impractical.
